They tried to get it...Fkrs!

[Big Z]

Whats it gonna take to fix??

Any Ideas Drty?

[tower]

Oh man! That sucks! Was it a vanity plate that would piss off a tree hugger?

[Grizzy]

looks to me like he whited out the plate for privacy reasons but the damage around the plate, 'pat on the back' for whoever did it.

[Tex_h2]

Originally Posted by Big Z

Whats it gonna take to fix??

Any Ideas Drty?

I've got the same problem........let me know if you find a fix

[Grizzy]

[bochard]

I had same problem i removed back door cover and found screw posts I used epoxy to glue them back
let it dry for 24hrs before I assembled again
Still solid

[ROX]

Mine has been loose for years, prolly since I bought it. Sounds like bochard has the right idea. I was quoted $450.00 for a new one at the stealership. Mine is black, and I wanted one with the chrome on top. I'll trade ya!
Were they trying to steal a vanity plate? What'd you put on it? That didn't happen in your home town did it?

[blockrockin]

Originally Posted by bochard

I had same problem i removed back door cover and found screw posts I used epoxy to glue them back
let it dry for 24hrs before I assembled again
Still solid

i did the same ,works great now ! just have to remove the inside rear pannel to get access , not to hard easy after you do it once.

[blockrockin]

you can also find them on ebay for a few bucks if you need a new one.

[Hucky]

Id like to paint That Chrome part on my Rig, How does that assembly come off, I mean come off the proper way?

Inside panels have to come apart?

Thanks

That sucks, what were they after and why?

[Big Z]

Originally Posted by H2 Rocks

Mine has been loose for years, prolly since I bought it. Sounds like bochard has the right idea. I was quoted $450.00 for a new one at the stealership. Mine is black, and I wanted one with the chrome on top. I'll trade ya!
Were they trying to steal a vanity plate? What'd you put on it? That didn't happen in your home town did it?

Might be up for a trade!

It was Kalifoni!..I think!

[Takecover]

Mine is coming loose on that same top right corner just like that one. Any help on how to get that back panel apart to get to the piece? I am sick of breaking all the plastic panels on my truck each time I start a project!!!!

[bochard]

Remove bolts that hold hand loop and hooks
after that it just pulls apart its held togeter with plastic clips

Similar to these

once removed look for bolts that hold the licence plate holder in place

[dkhummerh2]

Mine came so loose that I couldn't open the back hatch. Cost me about 300 at the dealership.
dk

[jmsspratlin]

Originally Posted by blockrockin

you can also find them on ebay for a few bucks if you need a new one.

really? I've been looking for quite a while without any luck

[blockrockin]

yeah i found one one their for 20 bucks. maybe one will pop up !

[tower]

Groovey diagrams courtesy of KenP & CP!

[bochard]

Thats what I meant

Great diagrams

[DRTYFN]

Originally Posted by Big Z

Whats it gonna take to fix??

Any Ideas Drty?

I've had one replaced, but have never actually looked at repairing one. I would imagine that some good plastic fusion glue would do the trick.

[ROX]

Originally Posted by tower

Groovey diagrams courtesy of KenP & CP!

Those are groovey. Thanks!