|
#3
11-08-2005, 09:57 PM
Hummer Expert
Join Date: Mar 2005
Location: Colorado
Posts: 757
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by TroysH2:
What electrical device/s send this message(SERVICE 4WD) to the Instrument Panel. The Locking Rear Axle Button flashes sometimes as well. </div></BLOCKQUOTE>
Encoder motor, 4wd module, diff actuator, etc.
__________________
1999 AMGeneral H1 6.5TD BLACK Wagon e-Lockers Front and Back, Rubberduck4x4 RockTubes, Extended Undercarriage Protection,"Big Duck" 2" body lift/2 1/2" suspension lift, 41" IROK Radials on 17" Cepeks w/Rock Rims, (in process)Centered front diff, 3.08 gears, 12k Brakes and 12k halfshafts
#5
11-09-2005, 11:44 PM
Join Date: Nov 2003
Posts: 267
In my experience, that message meant that the coil assembly retainer has failed. This means that the actuator wires have been broken due to the rotation of a component designed to remain stationary. This will require the replacement of the coil assembly because the wires ripped durring rotation. You will need to remove the e-locker, remove the bearing, and C clip in order to remove and replace the coil assembly. The coil will cost you around $150 bucks.
This will be covered under warranty.
view pics
__________________
CONFIDENTIALITY NOTICE: This post and any pictures posted with it are the property of Adam in CO and/or his affiliates. The contents of this post are confidential and may contain information that is privileged and/or exempt from disclosure under all
#6
11-09-2005, 11:45 PM
Join Date: Nov 2003
Posts: 267
The wire is connected to the coil.
__________________
CONFIDENTIALITY NOTICE: This post and any pictures posted with it are the property of Adam in CO and/or his affiliates. The contents of this post are confidential and may contain information that is privileged and/or exempt from disclosure under all
#7
11-09-2005, 11:49 PM
Join Date: Nov 2003
Posts: 267
The coil retainer is a 3/16 this hardened wire that fractures under pressure.
the pic shows the broken retainer.
__________________
CONFIDENTIALITY NOTICE: This post and any pictures posted with it are the property of Adam in CO and/or his affiliates. The contents of this post are confidential and may contain information that is privileged and/or exempt from disclosure under all
#8
11-09-2005, 11:52 PM
Join Date: Nov 2003
Posts: 267
Because this happened to me 3 times, I designed and custom manufactured a new retainer. I will have to post the specs some time.
__________________
CONFIDENTIALITY NOTICE: This post and any pictures posted with it are the property of Adam in CO and/or his affiliates. The contents of this post are confidential and may contain information that is privileged and/or exempt from disclosure under all
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 06:49 PM.
Linear Mode
