needing help with what kind and where ( LIFT KITS )???

[PhillyPhreak]

yea but if you re-gear you will gain a lot of the power back....cheaper than going FI.
Edit:
Or better yet do both!!!!

[drmiles]

Yeah, may do both.

Regearing would help more on the low end than @ the top. Truck has plenty of power under 50mph (Breathless performance package, powerflash programmer, extreme flow exhaust). Its driving 70mph in a 6,000 lb brick with a 7,000 lb trailer up hill that its lacking. Needs more horses for that Supercharging now, trade for duramax desiel in 2006.

[DH22G]

talk to Adam in co... he has the rancho 2 in with 37s and the thing is SICK

[PhillyPhreak]

Interesting drmiles....I'm use to jeeps...and beleive me you really feel the difference in the low end once you go to 33's....you need 4.56 or 4.88 when you go to a 35's in a wrangler.

[drmiles]

Yeah I agree both options would Increase my towing ability. My theroy is you can never have too much horsepower!!! So I'm looking into SC's now and regearing later if needed. Also want a front locker added when and if I regear.
It was suggested the 4:10 to 4:88 would not be noticeable. So I am waiting for the 5:13'S to come out.

[superbeast]

who is adam from co and how do i get ahold of him to find out where and what kind to get of this size

[JamesT]

6" FABTECH

[JamesT]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by JamesT:
6" FABTECH </div></BLOCKQUOTE>

Opps

[Longhorn]

I like the lift but the tires look way too small. What the point of adding 6 inches but no larger meats? I know you didn't care for the ride with the Nittos but it just looks sort of unfinished.

I run the same tires you have with no lift or rubbing. I'm not trying to stir anything up. Don't take this the wrong way.

[JamesT]

As a matter of fact, today Toyo 38 MT's are being slapped on. I'll post some pics tormorrow. BTW...you are 100% right!

[JamesT]

These.

[Salt Lake City HUMMER]

gotta go with a Fabtech 6", and 40x15.50r22 there is no sweeter look.

[Salt Lake City HUMMER]

and a comparrison look.

[JamesT]

Mine now with new BIGGER SHOES! What do you think now Longhorn?

[Longhorn]

James-

Just when I thought you couldn't sink any lower into Blingdom, you go and to do some thing like this. . .

AND totally redeem yourself. It looks much better.

[1BADH2]

I was looking to buy the Sky Jacker because of no cutting or welding but it looks like Dr. Miles has the stock front end rack that I want to get rid of but on Salt Lakes and James they appear to have lost that can some one shine some help me out on this?

[JamesT]

No cutting or welding on mine. Not sure what you mean about the front end but my stuff is stock. ???????

[drmiles]

What do you mean by Stock Front end RACK?<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by 1BADH2:
I was looking to buy the Sky Jacker because of no cutting or welding but it looks like Dr. Miles has the stock front end rack that I want to get rid of but on Salt Lakes and James they appear to have lost that can some one shine some help me out on this? </div></BLOCKQUOTE>

[1BADH2]

Dr. I'm talking about how the front end dosen't sit level with the back.Mine is way off and just wondering if the lift takes that away?

[drmiles]

Simply adjust the torsion bars upward. I think mine is too high in the front now.. those pics were shortly after I had it done. I noticed that if I added the winch it sagged even more, so I cranked the torsion bars a couple of turns.
However If I had it to do over I would go with the Fabtech lift and add upgraded trailer arms, instead of stock.