H2 part swap? school me please

[Kerr]

Hello everyone,

Ive been reading up and just decided i would ask,

Im looking at 2006 H2, Not sure what package, but the dash shows what looks like a locker switch ( left beside navi) and up arrow on the bottom of the dash in front of the gear shift.

from what i can tell a lot of stuff from a 2500 gm will interchange in the front end, but what about the rear end?


Reason i ask is i have 01 2500 suburban , with 4:88 gears, E locker in the front, new hubs, new A arms, and every thing upgraded. i would want to swap over to the H2, if it will work..

As for the rear end i have leaf springs or course, and every H2, ive seen is coil or air bags... I know the H2, is a 14 bolt and 8 lug but what is the size, mine is a 10.5" that was rebuilt a year ago will 4:88s and Detroit, Is it possible to just swap the guts and go? or does anyone make a shackle mount to make it leaf sprung?


Body / bumpers, what is the frame width difference in a 2500 and H2, i read a few placed the H2 is based off a 2500 in the front but 1500 rear.. I currently have front and rear steel winch bumpers. Yes i know the body style design is wrong but i have a saw, so really only interested in if hey would "bolt" up...


also what transfer case is in the H2, and how strong is it? I have the auto trac, which has been upgraded / rebuilt with a lot better clutches, however its bolted to a 4L80E, and from what i understand the H2 runs the 4L60E?


thanks for the info!