Lets Build a Hummer

[JamesT]

Stay with me on this one.

On the classified section of the forum there is enough parts so it seems, to build a H2 from top to bottom. We send all of out unwanted parts to SFox and he can build an H2. At that point he can either keep it and send all who donated parts a reasonable fee for the parts or we can put on on Ebay and split the winnings.

http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif

Seth???

[Adam in CO]

I know of a 3rd row seat for only 600 bucks.

[Adam in CO]

And I can get Neil to pull my old skid plate out of the scrap metal bin at his shop.

[PARAGON]

I've got a grill, bent brush guard, MAF sensor, stock radio, 4 other wheels, 2 tie rods, front bumper, a few fuses for the fuse box, a partial wiring harness from an Escalade but will work in an H2, a few little plastic thingys that came from somewhere in the cab (you'll be required to figure out where they go)

[PARAGON]

Originally posted by Alec W:
Don't you have the beer can thingy too? Not any more? http://www.elcova.com/infopop/emoticons/icon_wink.gif

[Adam in CO]

I also have the stock center console bucket, stock off road light covers, just the covers, a stock tie rod end, the original grille, and 1 stock wheel but it's pretty banged up. http://www.elcova.com/infopop/emoticons/icon_smile.gif

[h2co-pilot]

I got four stock wheels. Adam can provide the spare - and the pee to make it a true elcovan H2.http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[PARAGON]

Originally posted by Adam in CO:
I also have the stock center console bucket, stock off road light covers, just the covers, a stock tie rod end, the original grille, and 1 stock wheel but it's pretty banged up. http://www.elcova.com/infopop/emoticons/icon_smile.gif Oh, I forgot, I have the stock offroad lights to go with your light covers.

[CO Hummer]

I can contribute the stock gas cap since I have a locking one.

[PARAGON]

Originally posted by h2co-pilot:
I got four stock wheels. Adam can provide the spare - and the pee to make it a true elcovan H2.http://www.elcova.com/infopop/emoticons/icon_biggrin.gif keep up to speed, come on. we already have enough wheels. This isn't a 9-wheeler. http://www.elcova.com/infopop/emoticons/icon_wink.gif

[h2co-pilot]

Oh Solly. I skimded.http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[CO Hummer]

Oh, and I have 4 stock stem caps for the tire valves.

[JamesT]

I know Phil has a corner bumper piece.

[CO Hummer]

I wish could find some cool places to wheel that have graffiti like this. LMAO!

[JamesT]

We've covered this.

That is NOT graffitti!! This is ancient tribal markings. It translates loosly too: "Large stone that causes damage."

[CO Hummer]

I'll throw in a stock underbody cage and backup skid plate too.

And...I have an extra worn out rear liftgate air spring.

[JamesT]

"And a partridge in a pear tree"Originally posted by sfox:
The tally so far....

12 tube steps
4 off-road lights
2 off-road light covers
1 gas cap
4 tire valve stem covers
19 wheels
1 beat to sh1t skid plate
2 grills
1 bent brush guard
1 MAF sensor
1 stock radio
3 tie rods
1 front bumper
a few fuses
1 partial wiring harness from an Escalade
a few little plastic thingys
1 rear bumper
1 liftgate strut (blown)
truck shields
assorted broken bits from an unnamed source....

I still think we are missing a few things http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

S

[PARAGON]

Originally posted by Alec W:
I have a gear shifter, more grill lights, various metric nuts and bolts and two silver roof bars too add.

Oh yeah again. I have various nuts, bolts and screws. Every time I work on the truck I always have extra ones left over. http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[jfox]

Originally posted by my husband http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif:
The tally so far....

12 tube steps
4 off-road lights
2 off-road light covers
1 gas cap
4 tire valve stem covers
19 wheels
1 beat to sh1t skid plate
2 grills
1 bent brush guard
1 MAF sensor
1 stock radio
3 tie rods
1 front bumper
a few fuses
1 partial wiring harness from an Escalade
a few little plastic thingys
1 rear bumper
1 liftgate strut (blown)
truck shields
assorted broken bits from an unnamed source....

I still think we are missing a few things http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

Unless you also have a new work space for this project on the list you are NOT bringing all this crap into the garage! Love Ya!

J.

[KenP]

Originally posted by sfox:
Actually, I think that piece of bumper now resides on the mantle of a certain Virginia Jeep driver...http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

S He showed it to us!!!11

[KenP]

Originally posted by Alec W:
I'm surprised Ken hasn’t donated his slightly worn t-case to the cause. Done. It's your Seth!

Manik brush guard
Bent Fabtech tierod
T-case actuator
front bumper

[GLBLWARMR]

I'll toss in a couple license plate frames.

[JamesT]

Shut up and get back in the kitchen! http://www.elcova.com/infopop/emoticons/icon_biggrin.gif
Originally posted by jfox:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by my husband http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif:
The tally so far....

12 tube steps
4 off-road lights
2 off-road light covers
1 gas cap
4 tire valve stem covers
19 wheels
1 beat to sh1t skid plate
2 grills
1 bent brush guard
1 MAF sensor
1 stock radio
3 tie rods
1 front bumper
a few fuses
1 partial wiring harness from an Escalade
a few little plastic thingys
1 rear bumper
1 liftgate strut (blown)
truck shields
assorted broken bits from an unnamed source....

I still think we are missing a few things http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

Unless you also have a new work space for this project on the list you are NOT bringing all this crap into the garage! Love Ya!

J. </div></BLOCKQUOTE>

[JamesT]

Opps sorry. YOU get back in the kitchen a cook something. Who's the boss in your house anywa....nevermind...forgot. http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gifOriginally posted by sfox:
I IN NO WAY endorse the comments made in the previous post by one JAMEST...a known rabble-rouser and trouble maker on this forum....


I heart you J http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

S

[JamesT]

Seth, we live in the same world dont we? Just differnt houses.

[jfox]

Originally posted by JamesT:
Shut up and get back in the kitchen! http://www.elcova.com/infopop/emoticons/icon_biggrin.gif


JamesT - dialing your home/office phone now.

"Hi this is Joyce can I speck to L.(your wife) please? Yes, this is about her husband James." http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

J.

[KenP]

I know, I know... but I ca-a't re-sisst teh pow-er of teh deeeeevvvvvviiiillllll.... http://www.elcova.com/infopop/emoticons/icon_wink.gif

http://images.amazon.com/images/P/B000069D4E.01.LZZZZZZZ.jpg

[KenP]

I like that rig! Looks like an old diner car on 'roids. http://www.elcova.com/infopop/emoticons/icon_wink.gif

[CO Hummer]

I'll through in my hi-lift jack since I've got a new caddie.

[timgco]

Originally posted by sfox:
So back to the important stuff...I still need a frame, an engine, some body panels, seats...well you get the idea....Tim you've gone through a lot of Hummers surely you have a ton of stuff laying around http://www.elcova.com/infopop/emoticons/icon_wink.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

S

Ok, I have:
the stock air duct somwhere with filter
two tie rod ends
one spare wheel and tire
stock shocks
stock steering stabilzer
set of tow hooks for the rear
set of rear door shocks
gas tank bezel w/ cap (cap leaks /throws TSB though)
skid plate (slight dent)
UC protection (slight bend) (comes with bent carriage bolts)
stock headlight bulbs (two sets)
mudder floor mats
slightly used, blood stained, ripped, incomplete set of neoprene seat covers
set black crossbows
chrome grille
painted rear tire cover (pewter and sais HUMMER in black)


I think that's about it.

[RIC-H0]

Hey Seth...If you make your H2, I'll build you some sliders. You've just gotta come and get 'em! http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[timgco]

Originally posted by CO Hummer:
I'll through in my hi-lift jack since I've got a new caddie.

"Sir, I think you should use your driver and stick it dirrectly up your arse." http://www.elcova.com/infopop/emoticons/icon_razz.gif

[JamesT]

I aint askerd of her. Dial away baby.

Wait. JK. PLEASE DONT CALL!!!Originally posted by jfox:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by JamesT:
Shut up and get back in the kitchen! http://www.elcova.com/infopop/emoticons/icon_biggrin.gif


JamesT - dialing your home/office phone now.

"Hi this is Joyce can I speck to L.(your wife) please? Yes, this is about her husband James." http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

J. </div></BLOCKQUOTE>

[HummerNewbie]

Originally posted by sfox:
You know Ken, leave it to you to drag a thread down to the lowest level of base nsults....stupidhead http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

ANyways, I think this is what we should be working towards:

http://www.camperspoint.com/IMG/jpg/jeepney3.jpg

S

Is that the new G Wagon? http://www.elcova.com/infopop/emoticons/icon_biggrin.gif