Log in

View Full Version : need stock ride height


tomp
08-14-2007, 05:57 PM
please let me know stock front ride height from center of front wheel to bottom lip of fender flare

tomp
08-14-2007, 09:47 PM
Anyone?

Vettster
08-14-2007, 10:34 PM
25 1/2" on my 06 SUT.:excited:

tomp
08-15-2007, 12:31 AM
Thanks Vett!

H2 007
09-14-2007, 11:50 PM
Has anyone ever measured what would be close to level on the front?

From the ground up to the bottom of the fender flare on mine (stock) is 42 1/2".

I think on my last one (a 2005) it was 43", which made it a little more level. I recall having an alignment done after wards, but figured I see if anyone else has raised the front some to level it out a bit.

I do recall the ride was a little firmer, which I actually preferred as with stock it seems like it wants to 'lean' some while going around corners.

Thanks!

IRA51
09-15-2007, 12:56 AM
you would be better off measureing from the frame to the ground on a level cement slab. body or fender lip is very hit and miss,too many variations.