*NEW* Rare Parts Tie Rod Ends

[Humdingah]

I have a new set of Rare Part tie rod ends for sale...they've never been mounted and look just like this in red:

http://dmaxstore.com/bmz_cache/5/59419f7729519c30f2f99192fa06954a.image.436x264.jpg

DMaxStore wants $268.99 for them plus shipping so figure they're going to set you back $290-ish with shipping as they are heavy. I'll sell mine for $250 shipped anywhere in the continental US and I won't sweat any PayPal fees.

I've got a set of the Kyrptonites on the way and won't be using these so they're sitting in my garage.

Thanks in advance,

Dan

[Humdingah]

Price drop to $225.00...

[Hummeron37s]

Thats a great price, I got mine for $350 a couple of month ago.

[Humdingah]

Thanks for the bump Hummeron and that's what I paid for them directly from Rare when I got them...it was before DMaxStore started carrying them.

Dan

[H2ummer]

I got a set of the Kyrptonites on the way and won't be using these so they're sitting in my garage.


I am looking at upgrading my Tie Rods and have been flip flopping on Rare Parts and Kryptonites. Might I ask why you decided to get rid of the Rare Part Tie Rods and go with the Kryptonites? Both look plenty beefy. I am on the fence. Sure, the Kryptonites might be a bit beefer, but are the Rare Parts that much worse. Has anyone broke either one that you have heard?

Thanks,
Wendell

[Humdingah]

I'm planning on doing a 12" Bulletproof lift with either 40's or 42's so I wanted the absolute strongest tie rods I could get. I did speak to the person at DMaxStore about both and he said the Rares are plenty strong and he didn't necessarily think that going with the Kryptonites would make a huge difference either way.

One of those things...

[Bimmer9938]

What color are the pair you have for sale?

[Humdingah]

They're the red ones...

[H2ummer]

I sent you a private message with an offer.

Wendell

[Humdingah]

Just checked it...I appreciate the offer but I'll pass.

[Humdingah]

First $200 plus the 3% in PayPal fees gets them...

[HumminNBoatin']

If you can wait till friday consider them SOLD!

[HumminNBoatin']

Humdingah

Can you please email me with the info so i can paypal you the money? the PM feature is not working on the site today.

Thanks!

[Hellz]

its not friday yet!
:raar:

[HumminNBoatin']

Sold! to me!

[ROUSHDEMON]

Sold! to me!

Way to upgrade those Fabtecs Eric :giggling: ;)

[Big.Z.hummin]

Way to upgrade those Fabtecs Eric :giggling: ;)
way to spell Fabtech Andres :giggling:

[ROUSHDEMON]

way to spell Fabtech Andres :giggling:

So I left out the "h".....go climb a rock.:D

[Humdingah]

SOLD to Eazy E (Eric)!

[HumminNBoatin']

I got the tie rods. Dan shipped them in a timely fashon and they were in brand new condition. Good guy to buy from for sure!

[Hellz]

so now your going to sell me those tierods.... right..........RIGHT!

:raar:

[HumminNBoatin']

Ill sell you the wore out fabtechs! lol. So here is the thing in the fabtechs make the rareparts look kinda puny. However I have not heard anything bad about the rareparts tie rods yet. But for the fabtechs to wear out in only 18 months is just pathetic and I kept them we greased. Here is a pic to compair the 2 different tie rods as you can see the fabtechs are much beefier. However they are made in China junk. The Rareparts are made in the USA!

http://i217.photobucket.com/albums/cc80/esitterle/Kennys%20Stuff/IMAG0124.jpg

[Hellz]

i have the Fabtechs installed right now.. but i have been chasing a steering pull issue that started when i replaced my bearing hubs and OEM tierods to the the Fabtechs. Also Tire rotation and alignement after isntalled.

I have since replaced the ebay bearing hubs with Timken hubs.. i just had the tires rotated this morning......kinda narrowing it down.

i suspected the tierods due to the rubber boot thats atatched to the silver ring is seperating, but i dont think that it would effect the functionality of it.

anyways.. i have been tossing the idea of picking up the Kryptonite tierods.

since chasing this pulling issue, i have replaced all the major parts except the center link bar, steering box, and steering knuckles..

/shrug
/wrist

[slippy]

just to add to the conversion the rareparts are smaller than the cognito tie rods aswell. i feel alot more piece of mind with the rareparts on my truck tho. the rareparts are a better quality product, not to mention heavier, and alot better paint job.

[HumminNBoatin']

Hellz you should defintly check your ball joints. To check them you are going to need a long prybar. Jack the truck up buy the lower controll arm and get the tire about 2-3" off the ground then stick your prybar under the tire and try to lift the tire up. If there is any movement or play you got problems. My ball joints did not make it to 100K miles. I had to replace all of them. The problem was not very noticeable when driving but I had a constant pull that I could not get to go away. Once I replaced the ball joints problems were solved.

[Hellz]

im going to have to test it out.. and it was something in the back of mind as a possibility.. but didnt think too much into it..

now tho, as it seems i ran out of whatelse it could be, it makes more sense that it could be the lower ball joint, as everythign else has been replaced..


thanks!

[tcalz06]

Hellz you should defintly check your ball joints. To check them you are going to need a long prybar. Jack the truck up buy the lower controll arm and get the tire about 2-3" off the ground then stick your prybar under the tire and try to lift the tire up. If there is any movement or play you got problems. My ball joints did not make it to 100K miles. I had to replace all of them. The problem was not very noticeable when driving but I had a constant pull that I could not get to go away. Once I replaced the ball joints problems were solved.


YEP I'd say ball joints. My dodge Diesel pulled and it was ball joints

[OrangeCrush]

Ill sell you the wore out fabtechs! lol. So here is the thing in the fabtechs make the rareparts look kinda puny. However I have not heard anything bad about the rareparts tie rods yet. But for the fabtechs to wear out in only 18 months is just pathetic and I kept them we greased. Here is a pic to compair the 2 different tie rods as you can see the fabtechs are much beefier. However they are made in China junk. The Rareparts are made in the USA!

http://i217.photobucket.com/albums/cc80/esitterle/Kennys%20Stuff/IMAG0124.jpg

Quick question hummin... I've got the fabtech tie rod ends and I've noticed a "popping" sound that I can feel under my feet.

I raised the body and checked the bodymount bushings (installed the plastic shim/cure from GM) but I think it's in the balljoints.

I've only got 50K miles on this H2 but after I greased them, they were a little better. (popped less)

Just wondering...

Mark