LIFTED HUMMERS THREAD!!

[tyler1bo]

We have a 2011 JK as well..lifted 4" with 35s and it barely gets 14 mpg..no one will ever talk **** about it. Not to mention the straight axle rides like ****, it's underpowered, and it doesn't have any of the amenities that my H2 has. Don't get me wrong I love the jeep. But it is no different than my H2. Oh and with 38" in tires I am getting 12 mpg on the hwy..11.5 or so around town with full time 4wd.

[guruerror]

http://youtu.be/VyjnFyjfp7I
What a freakin tool..and this is why you're a sh!tty comedian. This is the best material he could come up with.
...did anyone else notice that he had no audience?

Man, they just don?t know me... I ran a brand new Honda Accord into the woods and got called into the police dept when I lived up at the lake because a guy wouldn?t get over out of the left lane so I drove him into the woods.

I pushed a guy with my truck when he wouldn?t get out of the left lane.

I don?t mess with people, I respect the fact that they want to go under the speed limit or don?t drive the way I do but fuk with me, I won?t think twice about pushing you into the Goddammm ditch.

Asswipes....
I really feel ya on this. I do my best to honor the 'social contract' when driving, but when the same courtesy is PURPOSELY not returned...ah well, that's what pisses me off.

While I've never run anyone off the road (but don't get me wrong, I don't think I'm above it), I've issued my share of subtle scares. My favorites are the fools that think their gonna stop you from merging. I just keep drifting closer and closer and closer eventually they realize 'oh sh!t, this guy is really not going to stop...and he's got some big fukin tires.' The look of surprise+concern+anger on their face makes me smile a little inside.

Hybrids and mom's in minivans seem to be the violators around my way.

[2010_5thgen]

[QUOTE=2010_5thgen]HERE IT IS!
some crappy dark pictures. its supposed to snow prety good tonight, ill take better ones tomorrow.

http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/6cbc6e8c.jpg
http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/9bd5f612.jpg
http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/c4bdfedf.jpg
http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/4be0753e.jpg

[2010_5thgen]

sorry. tried to fix the links on my pictures i posted before.

[OrangeCrush]

[QUOTE=2010_5thgen]HERE IT IS!
some crappy dark pictures. its supposed to snow prety good tonight, ill take better ones tomorrow.

http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/6cbc6e8c.jpg
http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/9bd5f612.jpg
http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/c4bdfedf.jpg
http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/4be0753e.jpg


You know what I just realized would look kickazz on your H2... blacking out the grille guard. (IMO)

Truck looks great...



I agree..Porsche made the perfect sports car to me..it may not be the fastest but the engineering in that piece is brilliant. I always told myself if I ever had enough money for a supercar, that's the one I'd get.


You know, I test drove (for 2 hours) a Porsche Cayman Coupe this last summer. Now, by no means am I comparing that to any of the ?supercars? that are listed above but I have to say, Porsche has it right... that car (like most of their cars) is a DRIVER?S car.

The ergonomics, the firmness of the shifter, the handling, comfort of the seat, etc, etc would allow someone to run that car for hours at the track and not be fatigued.

I?m not saying that the other manufacturers aren?t like that (I?ve only driven a couple of gallardos and murcielago so I have no experience in supercars) but I love the way Porsche builds the car around the driver.

Mark

[2010_5thgen]

I've thought about it but I'd have to do the tail guards too which isn't out of the question. Ive concidered it

[OrangeCrush]

I've thought about it but I'd have to do the tail guards too which isn't out of the question. Ive concidered it


Tis cool... no disrespect to your ride, I just think the black guards on your black would look cool as shiet.


Mark

[tyler1bo]

Tis cool... no disrespect to your ride, I just think the black guards on your black would look cool as shiet.


Mark

I agree with Mark, although I like either way. The chrome looks pretty cool as well. But all black would be pretty awesome. I think eventually I'll put a black OEM guard on mine, just to add to the stormtrooper look.

[guruerror]

charles06/OrangeCrush/2010_5thgen/tyler1bo: I moved the Bugatti Porsche tangent over to it's own thread... :)

Talk about getting off topic! LOL!

http://www.elcovaforums.com/forums/showthread.php?t=42372

[OrangeCrush]

charles06/OrangeCrush/2010_5thgen/tyler1bo: I moved the Bugatti Porsche tangent over to it's own thread... :)

Talk about getting off topic! LOL!

http://www.elcovaforums.com/forums/showthread.php?t=42372


I was JUST thinking about doing that....lol.

Thanks! Not sure how we ventured from lifted hummers to bugattis...


Mark

[tyler1bo]

Good question! We did get a little carried away ;)

[tyler1bo]

[QUOTE=2010_5thgen]HERE IT IS!
some crappy dark pictures. its supposed to snow prety good tonight, ill take better ones tomorrow.

http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/6cbc6e8c.jpg
http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/9bd5f612.jpg
http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/c4bdfedf.jpg
http://i798.photobucket.com/albums/yy269/2010_5thgen/2007%20Hummer%20H2/4be0753e.jpg

You ever thought about painting your skid plate? It would match a whole lot better..take it off, sand the mess out of it, and give it a couple of coats of spray on bedliner. It'll look good!

[2010_5thgen]

There's a lot of things I've thought about. But not a lot that I actually want to do right now. I want to get the black part re powdercoated. It's starting to chip a bit. But this trucks done for this year.

[OrangeCrush]

[QUOTE=2010_5thgen]

You ever thought about painting your skid plate? It would match a whole lot better..take it off, sand the mess out of it, and give it a couple of coats of spray on bedliner. It'll look good!


The one pic looks funny.... your truck is hammered with salt and snow remains yet your front wheel looks brand new... lol.

Great looking truck, that's the only H2 I've seen with dual exhausts that I liked.


Mark

[2010_5thgen]

Well I drive the truck to the installer through some salty water. He mou Ted and balanced the wheels at his shop after installing the kit. So that explains the clean wheels. The exhaust is the gmpp exhaust. I think borla makes it for gm. It's pretty nice. Has the h2 on the tip.

[s_c5519]

Well I drive the truck to the installer through some salty water. He mou Ted and balanced the wheels at his shop after installing the kit. So that explains the clean wheels. The exhaust is the gmpp exhaust. I think borla makes it for gm. It's pretty nice. Has the h2 on the tip.
Oh wow, it looks like you have the same exhaust as I did. In an old post of mine, that you replied to and you didn't even know it! I didn't have the H2 chrome tips on mine so I think that threw you off. How do you like the sound? I only found it a bit louder than the stock exhaust. I'm surprised to hear it is made by Borla because the Borla ones I have heard on youtube sound much louder...

[2010_5thgen]

This exhaust was on the truck when I got it 5 years ago. Not sure how a stick hummer even sounds.... Or looks. Yeah borla makes a lot of gmpp exhaust systems. They make it for my Camaro too

[H2Much]

Man, the stories you guys tell about running people off the road cracks me up! I am not going to lie, I have run people off the freeway for driving freakin' stupid around me, so I am with you.

The main difference for me is that where I live, there are a ton of trucks, more than cars. With that, instead of getting hated on, I get props and waves all day. On top of that I bet people are popping wood left and right when they see my ride, especially dudes because they all wish they were rocking my ride.

Funny to see people's reactions though when you roll up on them towering over them... I always get people's kids pointing and getting excited when they see my truck, makes me smile. :o

Screw the haters, they just wish they could...

I'm with Tyler1bo though, let's see more pics!!

[tyler1bo]

:iagree: What he said!

[DeLH2]

Waking up the beast from hibernation :)

http://img.photobucket.com/albums/v624/del2000/2008%20Hummer%20H2%20SUT/photo1.jpg

[tyler1bo]

Finally somebody is keeping this thread alive! Love it

[Bimmer9938]

http://img.photobucket.com/albums/v624/del2000/2008%20Hummer%20H2%20SUT/photo1.jpg


Where does that rear step mount to?

[DeLH2]

Where does that rear step mount to?

It connects to the rear frame, bolts right up, as there's pre-existing holes to mount to...

[mralexx]

Almost done :shhh:

[guruerror]

OMG!

[OrangeCrush]

OMG!


X2.... boy, don?t I feel like the kid with the smallest penis at the playground.... errrr, I mean, ah, never freakin? mind.

Your?s is definitely bigger...LOL.


Looks great. How much lift? Are you going bigger tires? (what size are on there now? It?s hard to tell because you?ve got so much freakin? lift, the tires look small....lol)


Thanks,

Mark

[Bimmer9938]

Looks like the Bulletproof 12" kit. I'm guessing it has 40" Super Swamper M16's (keep in mind it's still on the lift).

[tyler1bo]

Thanks alot..my keyboard is messy :( SUB'D FOR MORE!

[Bimmer9938]

Reminds me of this truck:



http://www.facebook.com/photo.php?fbid=349441495120020&set=a.348179491912887.86790.173492872714884&type=3&theater





I have 600+ lifted Hummer pics here:



http://www.facebook.com/media/set/?set=a.348179491912887.86790.173492872714884&type=3


Feel free to join and share your pics.





:)

[1BAD_RIDE]

Here is my lifted 2008 Hummer so far. Thanks to RoushDemon and DJ MAC for the tips and the great pics of their awesome H2's

6" FABTECH DIRTLOGIC
FABTECH TIES
COGNITU UCA/DUAL SHOCK
FOX RACING SHOCKS
IRON BULL BUMPER
Iron bull front bumper
Piaa 510 X 2
Piaa 520 X 4
GOBI RANGER RACK
GOBI LADDERS
EAGLE EYES SMOKED
LED TAILLIGHTS
Warn Winch - 16.5ti Thermometric

[Bimmer9938]

Wow that looks just like Scott's truck, he even has those same bumpers on order!

http://sphotos.xx.fbcdn.net/hphotos-ash4/422058_2763798013674_1219560143_32139088_174118260 1_n.jpg

[tyler1bo]

I was fixin to say! Both very awesome trucks..definitely dressed up right!

[1BAD_RIDE]

- Heres a fewmore pics. Still under construction. Installing Hellwig Sways today, 2more piaa 520 on gurad, GOBI dual ladders+kit, gobi springs. I like the full size spare on roof. Next purchase. I also want to get the dmax- Kryptonite Center Link/Tie Rod Package. Looks crazy heavy duty. Alot beefier than fabtech ties. I also deleted most chrome with LineX, Entire front Grill /bumper LineX'd, entire mirrors lineXd, Gas cover/spare tire license light. side hood clamps, EG Wide flares also lineX'd

http://i1166.photobucket.com/albums/q601/DUBOIS0711/photo2.jpg
http://i1166.photobucket.com/albums/q601/DUBOIS0711/44.jpg
http://i1166.photobucket.com/albums/q601/DUBOIS0711/photo8.jpg
http://i1166.photobucket.com/albums/q601/DUBOIS0711/COOL1.jpg


E&G offroad extended fender flares
HELLWIG FRONT/REAR SWAYS
Ram Over the hood brushguard - lineX
Predator RAPTORQ - +65hp?
Gobi Ranger rack
Two Gobi Ladders
Piaa 520 ATV /FOG(4 on Gobi, 4 on BG 6 total)
Piaa 510 2-Offroad lights DRL
AMP power steps
20X12" fuel octances in black
TOYO MT 38X15.5X20
Cognito Heavy Duty Sway Bar End Links (SBELKHD-1000)
FABTECH 6" DIRTLOGIC
1 FTS27003BK Component Box 1
1 FTS27004BK Component Box 2
1 FTS27005BK RR Component Box w/ Coil Springs
2 FTS81017 Dirt Logic 2.25 Front Non Resi
2 FTS81021 Dirt Logic 2.25 Rear Non Resi
1 Front CV Drive Shaft
Iron bull front bumper - LIneX
EAGLE EYES SMOKED LED TAILLIGHTS/SIGNALS
IPCW SMOKE LENSES ALL AROUND
Warn Winch - 16.5ti Thermometric
Fabtech Tie Rods

[devilsfan]

How the EFFF did I miss this thread??!??!

Oh well...

Here's mine, as of last week:


http://i36.photobucket.com/albums/e16/wookiemouse/Hummer%20-%20BIG/29e9.jpg

6" Fabtech lift, 37" Goodyear MTRs on Eagles, Magnaflow exhaust.

Currently parked at Off Road Concepts in San Antonio, awaiting a 12" Bulletproof lift, Fox reservoir shocks, Corsa sport exhaust, 42" Pitbull Rockers on 20" Ultra Predator rims, new brakes and new gears. Will post pics when I get it back, hopefully in a week or 2. I'm having a very, very, VERY hard time being patient. :jump:

Stacy

[Bimmer9938]

I was fixin to say!


You sound so southern... lol.

[Bimmer9938]

Picture of Big Black when he was only Medium Black.


Truxxx keys w/Truxxx spacer kit and 37's.


https://fbcdn_sphotos_g-a.akamaihd.net/hphotos-ak-ash4/465282_365925816800798_1747291816_o.jpg

[tyler1bo]

You sound so southern... lol.

Well..I do live in Arab, Alabama. haha

[tyler1bo]

How the EFFF did I miss this thread??!??!

Oh well...

Here's mine, as of last week:


http://i36.photobucket.com/albums/e16/wookiemouse/Hummer%20-%20BIG/29e9.jpg

6" Fabtech lift, 37" Goodyear MTRs on Eagles, Magnaflow exhaust.

Currently parked at Off Road Concepts in San Antonio, awaiting a 12" Bulletproof lift, Fox reservoir shocks, Corsa sport exhaust, 42" Pitbull Rockers on 20" Ultra Predator rims, new brakes and new gears. Will post pics when I get it back, hopefully in a week or 2. I'm having a very, very, VERY hard time being patient. :jump:

Stacy


Can't wait to see that!! What's up with everyone going with the 12" lifts now?

[Bimmer9938]

Currently parked at Off Road Concepts in San Antonio, awaiting a 12" Bulletproof lift, Fox reservoir shocks, Corsa sport exhaust, 42" Pitbull Rockers on 20" Ultra Predator rims, new brakes and new gears. Will post pics when I get it back, hopefully in a week or 2. I'm having a very, very, VERY hard time being patient.

Stacy



Did you have to cut off the diff ear in the front with the Fab Tech? I've contemplated going to a Bulletproof, but was told since the Rancho kit requires the diff ear to be cut off I'd have to switch the axle housing too...

[tyler1bo]

Well in that case you could go to a Cognito couldn't you? I think you have to cut the diff on them as well, normal cognito lifts require cutting of the diff. It's just that they are really $$$.

[tyler1bo]

- Heres a fewmore pics. Still under construction. Installing Hellwig Sways today, 2more piaa 520 on gurad, GOBI dual ladders+kit, gobi springs. I like the full size spare on roof. Next purchase. I also want to get the dmax- Kryptonite Center Link/Tie Rod Package. Looks crazy heavy duty. Alot beefier than fabtech ties. I also deleted most chrome with LineX, Entire front Grill /bumper LineX'd, entire mirrors lineXd, Gas cover/spare tire license light. side hood clamps, EG Wide flares also lineX'd

http://i1166.photobucket.com/albums/q601/DUBOIS0711/photo2.jpg
http://i1166.photobucket.com/albums/q601/DUBOIS0711/44.jpg
http://i1166.photobucket.com/albums/q601/DUBOIS0711/photo8.jpg
http://i1166.photobucket.com/albums/q601/DUBOIS0711/COOL1.jpg


E&G offroad extended fender flares
HELLWIG FRONT/REAR SWAYS
Ram Over the hood brushguard - lineX
Predator RAPTORQ - +65hp?
Gobi Ranger rack
Two Gobi Ladders
Piaa 520 ATV /FOG(4 on Gobi, 4 on BG 6 total)
Piaa 510 2-Offroad lights DRL
AMP power steps
20X12" fuel octances in black
TOYO MT 38X15.5X20
Cognito Heavy Duty Sway Bar End Links (SBELKHD-1000)
FABTECH 6" DIRTLOGIC
1 FTS27003BK Component Box 1
1 FTS27004BK Component Box 2
1 FTS27005BK RR Component Box w/ Coil Springs
2 FTS81017 Dirt Logic 2.25 Front Non Resi
2 FTS81021 Dirt Logic 2.25 Rear Non Resi
1 Front CV Drive Shaft
Iron bull front bumper - LIneX
EAGLE EYES SMOKED LED TAILLIGHTS/SIGNALS
IPCW SMOKE LENSES ALL AROUND
Warn Winch - 16.5ti Thermometric
Fabtech Tie Rods


Seems like you put a lotta dough and time into this one! I love what you've done with it. How do you like the dual shocks in the front? I'm thinking of going the cognito/fox route in the future.

[Bimmer9938]

Well in that case you could go to a Cognito couldn't you? I think you have to cut the diff on them as well, normal cognito lifts require cutting of the diff. It's just that they are really $$$.


Yea, and they don't even offer a complete kit. I guess it's big enough for the time being. :giggling:

[pwrhse2k]

Nicely done Tyler!

[devilsfan]

Fabtech and Bulletproof don't cut. Which is one reason why I chose them.

As for the 12" lift - I don't think I would have gone with 12" coming from stock. The 6" was a major lift for a while....but I've had it for 7 years now. It's "stock" to me. And I'm in Texas and TIRED of sitting at traffic lights with a bigger truck than mine on either side. I figured you only live once....why not go totally badass with this beautiful truck? :)

[Bimmer9938]

Everything is bigger in Texas!

[Bimmer9938]

If you live in Texas why not just go to B&C Off Road and have a 18" Third Coast made for your H2 (shown with a 3" body lift as well below).


https://socaltrucks.com/forsale/photos/img_0261_1315805702.jpg

[tyler1bo]

I just can't get over the torsion bar drops on the B&C's. I'm pretty sure they just fab some full throttle kits. Don't get me wrong they have made some sick stuff. But I'm not a huge fan of those ugly T-bar drops.

[Bimmer9938]

I just can't get over the torsion bar drops on the B&C's. I'm pretty sure they just fab some full throttle kits. Don't get me wrong they have made some sick stuff. But I'm not a huge fan of those ugly T-bar drops.

They make them all in house, any size you want.

[Bimmer9938]

But I'm not a huge fan of those ugly T-bar drops.

http://i1054.photobucket.com/albums/s493/JSorgi/100_1611.jpg

:jump:

[tyler1bo]

hahahaha..Now THAT is the right way to lift a truck! How does the rear drive shaft even spin?

[OrangeCrush]

Fabtech and Bulletproof don't cut. Which is one reason why I chose them.

As for the 12" lift - I don't think I would have gone with 12" coming from stock. The 6" was a major lift for a while....but I've had it for 7 years now. It's "stock" to me. And I'm in Texas and TIRED of sitting at traffic lights with a bigger truck than mine on either side. I figured you only live once....why not go totally badass with this beautiful truck? :)


Sorry DF, Fabtech cuts too.... In my first H2, I installed a Fabtech and had to cut.

Even with Rancho, I believe I had to cut. (I installed, just don't remember)


Mark

[devilsfan]

Sorry DF, Fabtech cuts too.... In my first H2, I installed a Fabtech and had to cut.

Even with Rancho, I believe I had to cut. (I installed, just don't remember)


Mark

You are indeed correct. I misread - Fabtech does cut the differential. But neither Fabtech nor Bulletproof cuts into the frame. Cognito does.

[OrangeCrush]

You are indeed correct. I misread - Fabtech does cut the differential. But neither Fabtech nor Bulletproof cuts into the frame. Cognito does.


Can you repeat that? I want my wife to see that... I am right about something... she'll just tell me that even a blind squirrel finds a nut once in a while....LOL.


Seriously though... I had thought about going with a Cognito setup, I'm glad to see I didn't, I don't want to cut into the frame. (though I'm in the bodyshop- business)

Thanks,

Mark

[LoJac963]

I researched kits thoroughly when I was thinking about lifting and Bulletproof would be the only option. I don't want to hack up the diff or cut into any part of the frame at all. Completely reversible if need be which is a plus.

[OrangeCrush]

I researched kits thoroughly when I was thinking about lifting and Bulletproof would be the only option. I don't want to hack up the diff or cut into any part of the frame at all. Completely reversible if need be which is a plus.


After 2 H2's and COUNTLESS other vehicles that I have lifted, lowered, tubbed, swapped engines, blah, blah, blah, I have ALWAYS kept the "stock" parts "incase" I put it back to stop to sell it.

I'll be 50 in a few months and in all this time, I have NEVER ONCE put a car back to stock. I always say I will, always keep the parts just in case but when it comes time to sell it, all I end up doing is selling the vehicle as is and offer the new owner the stock parts.

What usually happens.... my shop is stocked full of stock parts from vehicles I'll never see again.

:D

Mark

[Bimmer9938]

Yea I've owned 84 cars, never returned one back to stock. :beerchug:

[Humdingah]

I researched kits thoroughly when I was thinking about lifting and Bulletproof would be the only option. I don't want to hack up the diff or cut into any part of the frame at all. Completely reversible if need be which is a plus.

From the Cognito 10-12" installation instructions:

"Remove the factory crossmember that is bolted in between the rear lower control arm pockets. On the 10 and 12-inch kits, the flange just under the front differential pinion yolk on 4WD models will have to be cut off. Use a
reciprocating saw and stay close to the back of the control arm pocket. On the 7-inch kit, the flange with the back 1 1/2? of the rear lower control arm pocket must be cut off to clear the differential. Retain this piece if desired for future reinstallation."

From the Bulletproof 12" installation instructions:

"Now you have to cut the frame. It?s easier to refer to the pictures below. But basically you want to remove the factory bump stop mount, then slightly cut the lower part of the upper a-arm tabs to allow for clearance of bulletproofs new upper a-arm drop downs. This will also include slightly cutting part of the rear lower a-arm tabs. Please refer to the pictures, so there are no questions."

Neither seem to require that the mounting boss on the differential be cut, which the Fabtech and Rancho require, but saying that none of them require cutting of any kind isn't true.

[mralexx]

Bulletproof

[devilsfan]

:jump:


My Bulletproof kit arrived at the shop yesterday. Fox shocks, gears, steps and exhaust are already done. Just need to finish the lift and get the new tires/wheels on, and it's good to go. Hopefully early next week.

Oh - and check the height. Texas lift laws say max height on the headlights is 54". It's going to be VERY close, otherwise it'll need some more mods. :(

[Humdingah]

Bulletproof
Did you have any issues with the install? How did you find Bulletproof's customer service if you needed to get in touch with them? Did the lift kit include everything you needed for the install? What size tires and any other pictures of the finished lift?

Thanks in advance,

Dan

[devilsfan]

What size tires and any other pictures of the finished lift?


I'm curious too what you're running.

I had a heck of a time finding street-quality tires that will fit (it's my daily driver). The max that Bulletproof recommends is 15.5 without mods, which limits you to Interco, Goodyear, and Pit Bull if you're looking to run anything above 40s. Interco has 44s (Swampers) but the road wear is crap. I have the Goodyear MTRs in 37s and can vouch for their road wear, it's excellent but they don't look very aggressive. I opted to hit the middle (Pit Bull Rockers) in 42s (max size they offer), they look good and supposedly have decent tread wear.

[Humdingah]

I opted to hit the middle (Pit Bull Rockers) in 42s (max size they offer), they look good and supposedly have decent tread wear.
I'm looking at Pit Bulls in 42s also...seemed like a good choice. Now just have to decide on the lift.

[mralexx]

Did you have any issues with the install? How did you find Bulletproof's customer service if you needed to get in touch with them? Did the lift kit include everything you needed for the install? What size tires and any other pictures of the finished lift?

Thanks in advance,

Dan


Install was straight forward, no welding no cuts. Had to grind a flap on the front end no big deal. CS was good, I had a problem with a bad tie rod. The threads got powder coated and stripped during the install. Brian fabricated and sent me another within 48hours. Most complete straight forward kit I have seen. Only thing I needed were stock coils for the rear to convert, I had the garbage air ride. Life time warranty on all Bulletproof parts regardless of abuse. Going to throw a 12 on my Silverado HD here in a few months. I'm running 40 interco m16 on 24 inch BMF. I drive this everyday and I could not imagine going bigger on tires. Im waiting on a photoshoot, haven't had the time. Glad I went with the 12 on 40s, it is perfect would not want it any other way.

[devilsfan]

http://i1054.photobucket.com/albums/s493/JSorgi/100_1611.jpg

What the heck did they use, a mattress frame???

The custom lifts are wicked. I still have to get 2 kids and groceries out of my truck tho. 12" is the max (until they graduate and get the heck out of my house, at least ;)).

[bigmikey82]

My lil truck and another lifted H2 w/road armor bumpers

http://img.photobucket.com/albums/v249/onyx01is/DSC04364.jpg

http://img.photobucket.com/albums/v249/onyx01is/DSC04362.jpg

[tyler1bo]

Both sick!

[OrangeCrush]

Both sick!


Yuck, Mikey's H2 looks good. That god awful bumper on the H2 with the ghetto wheel/tire combo looks stupid as hell (IMO)


Mark

[LoJac963]

^couldn't agree more

Your wheel combo is very nice but the low pro next to yours is absolutely terrible lol.

[cecil-1]

Both sick!

I agree.... Both look badass.

But I'm not sure about the Black on bottom of doors of SUT.
Might look better if ya look at whole truck.

[OrangeCrush]

I agree.... Both look badass.

But I'm not sure about the Black on bottom of doors of SUT.
Might look better if ya look at whole truck.

Yeah, black looks like an Avalanche's bottom moldings.


Mark

[devilsfan]

12" Bulletproof lift on 42" Pitbull Rockers. I don't think I'll lose sight of it in a parking lot ever again. :)

http://i36.photobucket.com/albums/e16/wookiemouse/IMG_5150_edit.jpg

[OrangeCrush]

12" Bulletproof lift on 42" Pitbull Rockers. I don't think I'll lose sight of it in a parking lot ever again. :)

http://i36.photobucket.com/albums/e16/wookiemouse/IMG_5150_edit.jpg


Whole crap that looks good. I REALLY like that.

One question though... how do the pitbull rockers drive on the highway? That was my choice but they didn't make them in radials at our sizes and wasn't sure how the bias was going to take the road at highways speeds.


Great job!


Mark

[devilsfan]

They ride fantastic. To the point I was on the brake most of the way because I couldn't keep it under the speed limit, they ride that smooth - I didn't feel like I was going that fast! You gotta have them trued, tho - anything over 38". My 37s weren't trued and this ride is so smooth compared to what I used to drive. They are loud, tho. Stereo can fix that. :)

[tyler1bo]

Figure I would keep this thread rolling!:jump:
http://i1113.photobucket.com/albums/k509/tyler1bo/hduece7_zps3a0398d1.jpghttp://i1113.photobucket.com/albums/k509/tyler1bo/Hduecetrkfest20112_zps9dec971f.jpghttp://i1113.photobucket.com/albums/k509/tyler1bo/Hduecetrkfest20116_zpsbe07ef5b.jpghttp://i1113.photobucket.com/albums/k509/tyler1bo/Hduecetrkfest20117_zps76cec80e.jpghttp://i1113.photobucket.com/albums/k509/tyler1bo/IMG_3998-Copy_zps4befd84d.jpghttp://i1113.photobucket.com/albums/k509/tyler1bo/IMG_3999_zps9fd7addd.jpghttp://i1113.photobucket.com/albums/k509/tyler1bo/IMG_4001_zps8e260f0d.jpg

[OrangeCrush]

Like the white one but the black one looks like a skateboard... way too wide (IMO)


Mark

[tyler1bo]

haha. yeah it's a little extreme. It's a 6" BDS on 35" toyo's with 22x14 octanes AND 2" and 3" wheel spacers ;) the wheel spacers kinda make me nervous since the truck is so heavy, but I think I'd still rock it.

[OrangeCrush]

haha. yeah it's a little extreme. It's a 6" BDS on 35" toyo's with 22x14 octanes AND 2" and 3" wheel spacers ;) the wheel spacers kinda make me nervous since the truck is so heavy, but I think I'd still rock it.


But damn, the entire wheel/tire is OUTSIDE of the fender.

Mark

[tyler1bo]

haha. Cali style!

[Bimmer9938]

This was posted on Lifted Trucks USA today.

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/221369_440412869356215_1569677441_o.jpg

[tyler1bo]

God those are some big boggers..I bet the ifs is pissed at him for that!

[guruerror]

haha. Cali style!
LOL...glad I'm in MD.

[[__--MUD--__]]

That poor flat black sut has been abused and needs to be adopted. :crying:

[guruerror]

']That poor flat black sut has been abused and needs to be adopted. :crying:
Agreed...it's like its nuts have been cut off and it's being dressed up in girl clothes.

[guruerror]

This was posted on Lifted Trucks USA today.

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/221369_440412869356215_1569677441_o.jpg
That thing is a monster!

[tyler1bo]

http://i1113.photobucket.com/albums/k509/tyler1bo/2005-H2-Hummer-SUV-6in-Fabtec-Lift-22in-MHT-Fuel-Wheels-5GRGN23U85H129797-1.jpg

White door handles! Always wondered what that would look like..:shhh:
http://i1113.photobucket.com/albums/k509/tyler1bo/31082450005_large.jpg

http://i1113.photobucket.com/albums/k509/tyler1bo/2008-hummer-h2-sut-nav-dvd-88720.jpg

http://i1113.photobucket.com/albums/k509/tyler1bo/lexani2008products042.jpg

http://i1113.photobucket.com/albums/k509/tyler1bo/iPhotoLibrary.jpg

[OrangeCrush]

Ya know, I've never really liked the wheels on this H2.

http://i1113.photobucket.com/albums/k509/tyler1bo/2005-H2-Hummer-SUV-6in-Fabtec-Lift-22in-MHT-Fuel-Wheels-5GRGN23U85H129797-1.jpg
but they look really good.



Mark

PS. And btw, NO on the white door handles.

[tyler1bo]

haha..Y U NO LIKE WHITE DOOR HANDLES?? ;)

[Bimmer9938]

LIFTED H1 (http://www.facebook.com/media/set/?set=a.361871103877059.89293.173492872714884&type=3)


LIFTED H2 (http://www.facebook.com/media/set/?set=a.361612967236206.89261.173492872714884&type=3)


LIFTED H3 (http://www.facebook.com/media/set/?set=a.361872247210278.89294.173492872714884&type=3)

[PaHumBug]

Wow, that's a serious collection of cool pics.

[H2Much]

Loving that one of the lifted H2's parading in the middle of traffic, that is awesome. Wish I could round up some Hummer drivers around here and shut down the street like that.

[MARKCORE]

http://i1113.photobucket.com/albums/k509/tyler1bo/IMG_0463.jpg

How do you like the Rancho lift? How did the 38's fit before the Truxxus leveling kit was added?

I think I might go with the Rancho 4'' and the same size wheel/tire combo. -42 offset right?

[tyler1bo]

How do you like the Rancho lift? How did the 38's fit before the Truxxus leveling kit was added?

I think I might go with the Rancho 4'' and the same size wheel/tire combo. -42 offset right?

The keys were added with the lift, so I couldn't tell you how they fit with just the rancho. But I believe they'd do just fine, there's other members on here who have run just the 4" kit with 38's and had no issues. I've been very pleased with the kit thus far, however, if I were to do it again I'd go atleast 7". (But that's just me wanting more ;)) and the wheels are 20x10 in a -24 offset.

[tyler1bo]

How do you like the Rancho lift? How did the 38's fit before the Truxxus leveling kit was added?

I think I might go with the Rancho 4'' and the same size wheel/tire combo. -42 offset right?

The keys were added with the lift, so I couldn't tell you how they fit with just the rancho. But I believe they'd do just fine, there's other members on here who have run just the 4" kit with 38's and had no issues. I've been very pleased with the kit thus far, however, if I were to do it again I'd go atleast 7". (But that's just me wanting more ;)) and the wheels are 20x10 in a -24 offset.

[MARKCORE]

The keys were added with the lift, so I couldn't tell you how they fit with just the rancho. But I believe they'd do just fine, there's other members on here who have run just the 4" kit with 38's and had no issues. I've been very pleased with the kit thus far, however, if I were to do it again I'd go atleast 7". (But that's just me wanting more ;)) and the wheels are 20x10 in a -24 offset.

Thanks!!

[Bimmer9938]

I added keys when I was still on 37's as well, but if you add keys you will want to add Cognitio UCA's for more down travel and to correct some of the angles. Also have 2" BL as well on 40's.

http://i1154.photobucket.com/albums/p537/LiftedTrucksUSA/RYAN%20L%20HOLBROOK%20PHOTOGRAPHY%20SHOOT/a2a62c5d.jpg

[tyler1bo]

24x14 :)

[Bimmer9938]

I know... I know... I have two other builds going on though.

[tyler1bo]

Ah yeah, forgot..how's the jeep and srt lookin?

[MARKCORE]

Should I replace the UCA's after the 4'' lift? Truck will never see any hardcore off roading but still want it solid.

[Bimmer9938]

Should I replace the UCA's after the 4'' lift? Truck will never see any hardcore off roading but still want it solid.

You only NEED to if you're adding a leveling kit to it, unless you want to do it just to add dual shocks down the road with the Cognito shock hoops.

[[__--MUD--__]]

There are some really ignorant *******s knocking every hummer off the lifted trucks facebook page.

Funny how they all most always start w/ I'm a GM or Chevy diehard and I hate....because they just ripped off a tahoe or surburban....Its a gas hog..bla bla bla

Its all GM. Family is family, nothing you can do about it. Hate on the imports.

Makes me laugh when I see the gas hog comments twards hummers and there are 30 other trucks w/ 70+" tires around it, that get 4MPG at best.

[tyler1bo]

My thoughts exactly..lift any regular every day fullsize and watch it's gas mileage goes to hell..but noooooo one would ever call it a gas hog. Apparently only hummers have bad gas mileage.

[Bimmer9938]

Yea, there's some raciest opinionated people on there... and they hate Toyota's too even though the Tundra is the second most all American made truck on the market, most GM's are made in either Mexico or Canada. :notallthere:

[MARKCORE]

What size lift is on yours with those 40's?

[tyler1bo]

4" Rancho, 2-3" Truxxx keys, 2" body w/ Cognito UCA's.

[2010_5thgen]

I miss my hummer....

[tyler1bo]

Sorry to hear that man..but we warned you! haha. I keep telling myself not to sell mine, because I have a feeling I'll miss it.

[OrangeCrush]

I miss my hummer....

I know where there is a white SUT with a duramax in it for sale.


:D


Mark

[MARKCORE]

I know where there is a white SUT with a duramax in it for sale.


:D


Mark

I would love to own your rig!

[2010_5thgen]

Yeah me too. If I get another one any time soon, it will be a higher mileage one. My silverado may be sold here soon so maybe ill get an h2 and throw a plow on it. But I've got a while list of other cars I want too. So many choices.....

[guruerror]

Yeah me too. If I get another one any time soon, it will be a higher mileage one. My silverado may be sold here soon so maybe ill get an h2 and throw a plow on it. But I've got a while list of other cars I want too. So many choices.....
LOL...I"m just picturing Mark's truck with a snow plow...HA! Sweet...that DMax would push some snow for sure.

[OrangeCrush]

LOL...I"m just picturing Mark's truck with a snow plow...HA! Sweet...that DMax would push some snow for sure.


:clapping:


Mark

[Devine H2]

Keeping the thread chuggin along!!!.... 6 inch Fabtech lift... 40x15.5 Mudgrappler tires..20x12 Fuel Octane deep dish wheels.. E&G fender flares...etc.. etc.. etc...(truck is parked on a slight incline)..Just got it back.. More mod's and pics to follow....

[tyler1bo]

Sick! Glad this thread is still alive!

[Devine H2]

:D Thanks Man!... Love this thread!!

[tyler1bo]

Best one we've got! haha..I'm a little biased though ;)

[Devine H2]

Getting a suntan ; )

[tyler1bo]

Any rub with the 40s?

[Devine H2]

No sir.. Non whatsoever ..the 6 inches of additional lift gives it what it needs to clear a full turn to either side with no rub at all...surprisingly after programming the Superchips tuner to adjust the new tire height and boost the HP the truck is pretty peppy off the line...rides like a Cadillac too with the new shocks ..

[MARKCORE]

VIVA LA THREAD!!! :beerchug:

Can you post a front and rear view? Looks great! Whats the offset on the wheels?

[Devine H2]

Brought the beast out to "Octane & Fuel" here in Atlanta... The guys from "Monster Customs" (who did and will continue to do my mod's) brought there H1 monster as well....I would have to say the H2 held it's own beside it.... But damn that H1 is wide as hell!

I'll get some more direct front pics as well as rear later on today!!

[Devine H2]

Markcore..

Wheels offset is -44mm

[MARKCORE]

Markcore..

Wheels offset is -44mm

Thanks.

Is the Fabtech the only lift you have or did you make some T bar adjustments as well?

[Devine H2]

VIVA LA THREAD!!! :beerchug:

Can you post a front and rear view? Looks great! Whats the offset on the wheels?

Here you go my friend...Truck is up at the shop getting exhaust and intake installed.. I'll get pics of the rear when I pick it up!

[Devine H2]

Here is my other toy and H2 when it had 22"Rockstar's and only 35's (pre-lift) and chrome grille...

[MARKCORE]

Thanks!!

I have an Audi as well ....Q7 ;)

Have you seen the Underground Racing TT R8?

[Devine H2]

Thanks!!

I have an Audi as well ....Q7 ;)

Have you seen the Underground Racing TT R8?

Nice!.. The Q7's are a very sweet!.. My wife and I looked at them when deciding bewteen the Q7 and the Cadillac..

Yes I've seen the Underground Racing TT R8.. totaly insane!!.. a buddy of mine has a R8 as well and he's getting TT installed on his as we speak... I worry about him at times : )

[tyler1bo]

Gotta love an R8..very dope rides buddy

[Devine H2]

Gotta love an R8..very dope rides buddy


Thanks bro!... Hopefully we can get some more Lifted H2 pics up in here!!....Since I'm new to the forum and dont know any better I apologize if this is a silly question, but does "Big Black" and "Roushdemon" still do frequent posts?.. I saw there rig's posted on this thread some time ago and they both look sick!....I'm looking at getting a brush guard, roof rack (ladder) and some sort of light bar .. I saw this light bar on a H1 and love the look of it... along with the headlights!.. does anyone have this set up on there truck? or something similar to it?

[tyler1bo]

Get a demonguard built by our very own, Roushdemon. They are awesome looking and hold up great! PM him

[Devine H2]

Thanks man!.. will do.. your the second person who has said good things about him and his work.. I'll shoot him a PM!..Appreciate it!

[guruerror]

Thanks bro!... Hopefully we can get some more Lifted H2 pics up in here!!....Since I'm new to the forum and dont know any better I apologize if this is a silly question, but does "Big Black" and "Roushdemon" still do frequent posts?.. I saw there rig's posted on this thread some time ago and they both look sick!....I'm looking at getting a brush guard, roof rack (ladder) and some sort of light bar .. I saw this light bar on a H1 and love the look of it... along with the headlights!.. does anyone have this set up on there truck? or something similar to it?
I've seen a couple trucks around here sporting those light bars...timgco has one plus he did a lower grille mod to get a lower set.

http://www.elcovaforums.com/forums/showthread.php?t=40987&highlight=led+grille

[Big.Z.hummin]

Thanks man!.. will do.. your the second person who has said good things about him and his work.. I'll shoot him a PM!..Appreciate it!
I had the very first demonguard made by Andres other than the one he has..let me tell you the thing was awesome, got the most comments, and completely saved my truck when i hit a brick wall going head on at like 20 mph

[Devine H2]

I've seen a couple trucks around here sporting those light bars...timgco has one plus he did a lower grille mod to get a lower set.

http://www.elcovaforums.com/forums/showthread.php?t=40987&highlight=led+grille

Ya that's what I'm talking about!.. Nice!...Help's seeing them actually on a
H2.. appreciate the post..Very nice set up

[Devine H2]

Sorry to hear about your collision.. but glad to hear the demonguard saved your truck!.... must be some top notch tubing material he uses...I perfer the thicker tube "look"... I've seen some brush guards on trucks in person and online and the tubing is too thin for my liking..Thank you for another recommendation for Team Andres!!!... I'll give him a holla



I had the very first demonguard made by Andres other than the one he has..let me tell you the thing was awesome, got the most comments, and completely saved my truck when i hit a brick wall going head on at like 20 mph

[ROUSHDEMON]

Thanks guys!! Yes still around DevineH2, Nice looking rig man! Looks great. Hit me up if you're interested in a DemonGuard, just finished one for another member in this forum, it's getting powder coated now.:dancingbanana:

I gotta get some updated pics of mine........ got bigger lights and tires are more wore out hahaha:raar:

[Devine H2]

Hey Andres!

Thanks man. Appreciate the compliment!! ..Your rig is sick!!..Was actually inspirational in my selection of wheels and lifting of my truck...

Your putting even bigger tires on your rig? Aren't those pitbulls like 41.5x16??? What do you have now??? Please post some pics!! I gotta see this freakazoid!!

Oh btw..sent ya a pm!!

Matt

[Devine H2]

Update! .. Finally installed!!.. Magnaflow dual exhaust and K&N cold air intake!!..Not only does it sound and look mean as hell now, but I've noticed a considerable amount of HP/torque increase compared to the stock pieces

[ROUSHDEMON]

Look good! can you hear your exhaust now over your tires?:clapping: If mine are loud I KNOW yours are uber loud, used to have those.

[Devine H2]

Ha. Yes actually I can.. It's just loud enough. I didn't want a overly loud obnoxious exhaust, but loud enough to make its presence know when you step on the gas pedal... I had a set of 35's Trailgrapplers on 22 Rockstars for about a month before switching up to the 40" Mudgrapplers and yes there is a noise difference, but honestly it's not much louder and actually rides better with the fatter wheels and tires ( and looks better )..

[Bimmer9938]

Did someone say my name?

http://itsthoseguys.files.wordpress.com/2009/01/09.jpg

[Devine H2]

Ha ha Big Black Boykin!! ..The legendary "Big Black SUT" is in the house!!!..glad to see your still around!..one of the baddest rigs on the planet!

[tyler1bo]

Word ^^^

[ROUSHDEMON]

So the DemonGuard finally came back from powder coating and forum member HUFFADDER drove up from ATL to pick it up. Snapped some pics with our very dirty rigs and just wanted to share them. His H2 looks freaking sick after everything that he's been planning for a year came together.

He promised to make a thread for his rig from beginning to end with pics so that will come soon. He's got top notch stuff in it and it's truely one of the best and coolest Hummers that I have ever seen.

Here are some pics of his DemonGuard on his truck after install.

Thanks Jason!:beerchug:

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/IMG_17311024x757.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/IMG_17471024x767.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/IMG_17491024x768.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_04021024x647.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_03671024x671.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_03891024x685.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_03841024x685.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_03631024x681.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_03911024x685.jpg

[HUFFADDER]

Thankyou Very much my man! I can't say enough about the craftsmanship of your work...I am Very Happy with it!!! If anybody is in the market fr a "REAL BRUSHGUARD" then there is really only one choice in my opinion & that's the the one Andres (ROUSHDEMON) makes! Thanks again & I will post a thread very soon with pics and details of my "Zombie Response Vehicle"...



So the DemonGuard finally came back from powder coating and forum member HUFFADDER drove up from ATL to pick it up. Snapped some pics with our very dirty rigs and just wanted to share them. His H2 looks freaking sick after everything that he's been planning for a year came together.

He promised to make a thread for his rig from beginning to end with pics so that will come soon. He's got top notch stuff in it and it's truely one of the best and coolest Hummers that I have ever seen.

Here are some pics of his DemonGuard on his truck after install.

Thanks Jason!:beerchug:

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/IMG_17311024x757.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/IMG_17471024x767.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/IMG_17491024x768.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_04021024x647.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_03671024x671.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_03891024x685.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_03841024x685.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_03631024x681.jpg

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/DSC_03911024x685.jpg

[Devine H2]

YES!!. Its done!!... Awesome man!!.. Andres did a hell of job with the brush guard...Looks freakin' sick man!... Looks like I'll be next : ) ... Let me know when you free and we'll get together with our rigs!!!

Matt

[guruerror]

You guys are really making me want one...
...I've gotta find a coupon...lol

[guruerror]

You're "very dirty rigs?" LOL! They both look clean as hell to me!

Those guards are awesome...

So the DemonGuard finally came back from powder coating and forum member HUFFADDER drove up from ATL to pick it up. Snapped some pics with our very dirty rigs and just wanted to share them. His H2 looks freaking sick after everything that he's been planning for a year came together.

He promised to make a thread for his rig from beginning to end with pics so that will come soon. He's got top notch stuff in it and it's truely one of the best and coolest Hummers that I have ever seen.

Here are some pics of his DemonGuard on his truck after install.

Thanks Jason!:beerchug:

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/IMG_17311024x757.jpg

[ROUSHDEMON]

hahaha, thanks man.

But actually that's some contrast and sharpening picture effects, you can't tell on Jason's but my truck is dirty as hell, haven't washed it in months.

Now, when I go offroading you can't even see the black......... I think I have some pics of that somewhere lol

[Devine H2]

Both trucks are sick!... Awesome work on the bruch guard Andres!!...Cant get much better than a lifted H2 sitting on 40's!!

[ROUSHDEMON]

Both trucks are sick!... Awesome work on the bruch guard Andres!!...Cant get much better than a lifted H2 sitting on 40's!!

Thank you very much sir! I'll be back in the shop in January, PM me when you're ready for yours!:beerchug:

[Smokin Joe]

I want to put a 6" fabtech lift on my 06' H2 with 20x10 rims and 38x13.5 TOYO MT's.
My garage opening is the problem, it's narrow but tall. Is anyone running the above setup that can give me the total width up front?
Thanks,
Joe

[tyler1bo]

How close are you now? It will widen the track and the tires will stick out a little more, but it won't be a massive difference. Atleast mine wasn't.

[Smokin Joe]

I only have six inches on each side now.

[tyler1bo]

I'm thinking you'll be fine.

[Smokin Joe]

Thank you. By the way I love your H2!

[Badace]

Andres, building roof racks? Will my demon guard work on a2009

[ROUSHDEMON]

Hey Bubba! Glad you're still rocking that H2, Yes it will fit a 2009, What color are you getting?? Love that blue you got! :)

Yes after I do some DemonGuards I might play around with some roof racks, But I just don't know how I will be able to ship them, gah! Big!!!

[Badace]

How bout shipping them in a weld it yourself package? Id be interested.

[Badace]

Fixing to throw down on some new wheels and tires. 37's. Thinking about a leveling set up. Then when the tranny tires out, duramax allison. Figure why spend 40k on an 80k mile 08. Just spend 35 and go diesel with 40's.

[DIRTYOLDBONES]

http://i1286.photobucket.com/albums/a616/williamhumphreys/2013-01-24141002_zpsa0852ccc.jpg

JUST DID A SIMPLE 3" WITH TORTION KEYS AND COIL SPRING SPACERS
DID UNDER 200.00:beerchug:

[Lean Machine]

Circling back on this old thread. Thought I would post a link to the lifted H2 I recently purchased.

http://www.envisionauto.com/listing/2008-h2-hummer-sut-6in-fabtec-lift-only-1300-kms

[BUNNY15]

Nice and clean. So your signature says you sold one just like it?

[Lean Machine]

Nice and clean. So your signature says you sold one just like it?

Yes, I sold my SUT with the same exterior and interior color the same month I bought the "new" one. The one I sold had over 60,000 miles on it and no lift.

[BUNNY15]

Yes, I sold my SUT with the same exterior and interior color the same month I bought the "new" one. The one I sold had over 60,000 miles on it and no lift.

I got ya! Some day I'd love to own a yellow SUT along side my SUV. The yellows seem hard to find. Not too sure why though.