H2 Right hand side-mirror

[My08h2]

Hi all,my right side mirror was cracked. Just wondering if anyone knows how to change just that??( not the whole thing,just the glass part ).

Thank you in advance!!!

[Easy Ed]

I am pretty sure it is removed in the same manner as this video shows.
http://www.youtube.com/watch?v=kM3dj1RDaow

Another video http://www.youtube.com/watch?v=cMfrhqVfW8Q

Service manual does not show just the mirror glass replacement so I could not use it for reference.

HUMTECH may have more info on a "how to" if he sees this post.

Could not find a actual video for our H2's. Suggest that you move mirror to one side so you can see behind it to see if it is the same method. Also if you have heated mirrors use caution with the fluid inside the mirror cause it will damage the paint.

Good luck, Ed

[My08h2]

Thank you very much!!!!!!!!!

[HUMTECH]

http://gsi.xw.gm.com/image_en_us/gif/000/001/990/1990759.gif
http://gsi.xw.gm.com/newsi/images/tif.gif (http://gsi.xw.gm.com/newsi/showTif.do?image=1990759)

Caution: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.

Notice: When servicing electrochromic glass that is broken, or if glass breaks during servicing, be cautious not to spill electrochromic fluid onto vehicle. Doing so will cause damage to the vehicle. 1. The top inboard corner is the ideal location for pulling the mirror out of the housing.

http://gsi.xw.gm.com/image_en_us/gif/000/001/990/1990757.gif
http://gsi.xw.gm.com/newsi/images/tif.gif (http://gsi.xw.gm.com/newsi/showTif.do?image=1990757)
1. Remove the mirror face as follows:
2.1Push mirror glass bottom outboard (1) corner, furthest away from the vehicle door, as far as possible into the mirror housing.

2.2Place fingers tips behind the top inboard edge (2) corner, closest to the vehicle door.

2.3Pull the mirror glass with light pressure until the glass comes loose.

2.4Holding the mirror face, disconnect the electrical connectors from the back of the mirror.

Installation Procedure


(http://gsi.xw.gm.com/newsi/showDoc.do?docSyskey=1990990&cellId=150436&pubObjSyskey=4947779&from=sm&pubCellSyskey=1568441&deliveryEffectiveDate=Feb+1%2C+2013#N65620)1. Position the mirror face on a angle to the mirror housing.

http://gsi.xw.gm.com/image_en_us/gif/000/001/990/1990756.gif
http://gsi.xw.gm.com/newsi/images/tif.gif (http://gsi.xw.gm.com/newsi/showTif.do?image=1990756)
1. Install the mirror face as follows:
2.1Holding the mirror face, connect the electrical connectors to the back of the mirror.

2.2Position the mirror face to the motor retainer tabs.

2.3Position the hand in the center of the mirror face.

2.4Apply light pressure to the face.

2.5Push downward and inward to lock in place.

2.6Inspect the mirror face for proper operation.

[Easy Ed]

Thank HUMTECH for giving the correct instructions :beerchug:

Ed

[HUMTECH]

Glad to help when i can

[My08h2]

Thank you Humtech!!!!

[My08h2]

Thanks so much guys!!! Just one last question,where can I buy that glass?? You guys think the one on e-bay is the right one?? http://www.ebay.com/itm/2003-2009-Hummer-H2-RH-Passenger-Side-Replacement-Mirror-SVR-1454-M2-/170975799302?pt=Motors_Car_Truck_Parts_Accessories &fits=Year%3A2008|Model%3AH2&hash=item27cef3a806&vxp=mtr




Thanks in advance!!!