OrangeCrush
02-24-2009, 03:44 AM
Someone on here had lifted (torsion bars) the front end of their H2.
The rear end was sagging a bit in comparison and I mentioned that they needed to raise the rear end by about an inch and a half.
Point is, I've got a set of rear spacers (1 1/2") that I won't be using with the new lift kit.
If you know who you are, let me know if I can help you.
Mark
The rear end was sagging a bit in comparison and I mentioned that they needed to raise the rear end by about an inch and a half.
Point is, I've got a set of rear spacers (1 1/2") that I won't be using with the new lift kit.
If you know who you are, let me know if I can help you.
Mark