Hummer Forums by Elcova - H2 160K Overhaul

Page 6 of 6

Show 40 posts from this thread on one page

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)

- Technical Discussion and Customizing your H2 (http://www.elcovaforums.com/forums/forumdisplay.php?f=5)

- - H2 160K Overhaul (http://www.elcovaforums.com/forums/showthread.php?t=39712)

jarek m

01-01-2013 07:09 PM

Re: H2 160K Overhaul

Quote:

Originally Posted by Hellz

i removed all the chrome off of mine with a power washer.

total time i think maybe an hour. from there i went and had it LineX

not sure what he did for his

I heard about the power washer trick but the temp. in NJ is to low for that, so I'm doing in the HARD way scalpel and cutters.

jarek m

01-01-2013 07:14 PM

Re: H2 160K Overhaul

Quote:

Originally Posted by iwillnc

Is that por15 your putting on the rusted crossmember? Brush on by the looks as well?

I need to get something and start getting the rusted knicks on my frame where something wiped the wax off the frame

No, I'm using oldtimer recipe for "wax-oil". This frame is going to end up galvanized at some point anyway...

POR-15 is great I recommend it.

iwillnc

01-01-2013 09:04 PM

Re: H2 160K Overhaul

"No, I'm using oldtimer recipe for "wax-oil". This frame is going to end up galvanized at some point anyway..."

Do explain? Is the wax identical to the factory wax on the frame? did you get down to bare metal before you applied it? How is it made?

Also how much, not including time spent removing everything from the frame would it cost to have the frame galvanized? Would it be dipped in zinc... or.....

Curious minds wonder.

jarek m

01-02-2013 06:16 AM

Re: H2 160K Overhaul

Quote:

Originally Posted by iwillnc

Do explain? Is the wax identical to the factory wax on the frame? did you get down to bare metal before you applied it? How is it made?

No way, this recipe is before everything had to be environmentally friendly and safe for consumption in case your kids decide to lick the frame.

Power wash area.

Tar, axle grease, USED diesel engine oil.... Mix all, boil, put the fire out, apply hot. (Keep out of reach of children) :)

jarek m

01-02-2013 06:21 AM

Re: H2 160K Overhaul

Quote:

Originally Posted by iwillnc

Also how much, not including time spent removing everything from the frame would it cost to have the frame galvanized? Would it be dipped in zinc... or.....

Curious minds wonder.

My local guy...
Galvanizing
V&S Amboy Galvanizing LLC
1190 Amboy Avenue
Perth Amboy, NJ 08861 USA
Phone: (732) 442-7555
Fax: (732) 442-5560
http://www.hotdipgalvanizing.com

Just had a visit at V&S Jon in sales says no job is to small, walk-ins welcome.
They do architectural finish and acid dip. Got to clean the paint before.
If we get over 500lbs it works out to be about 50 cents per pound and the closer to 4000lbs we get the deeper the discount gets.

iwillnc

01-02-2013 11:31 PM

Re: H2 160K Overhaul

Tar, axle grease, USED diesel engine oil.... Mix all, boil, put the fire out, apply hot. (Keep out of reach of children)

Hmm.. I don't think that's something to cook on the stove... haha
But cool to know...

The galvanizing is so cheap, that's pretty cool.

jarek m

01-08-2013 05:22 AM

Re: H2 160K Overhaul

Moving along...

jarek m

01-10-2013 02:26 AM

Re: H2 160K Overhaul

Final front end colors, still got to repaint, the finish isn't good but that's what it's going to look like.

iwillnc

01-10-2013 11:54 PM

Re: H2 160K Overhaul

Did you remove the letter out of the grille prior to painting? Are you going to put them back on?

jarek m

01-11-2013 05:03 AM

Re: H2 160K Overhaul

Quote:

Originally Posted by iwillnc

Did you remove the letter out of the grille prior to painting? Are you going to put them back on?

Yes, waiting for warmer temps.

jarek m

09-22-2014 05:35 AM

Re: H2 160K Overhaul

Who is ready for more fun!!!?

iwillnc

09-24-2014 03:56 AM

Re: H2 160K Overhaul

Waiting patiently everyday.

DRTYFN

09-29-2014 10:02 PM

Re: H2 160K Overhaul

Good thread. I enjoy watching someone capable fixing their own stuff. :beerchug:

DRTYFN

09-29-2014 10:06 PM

Re: H2 160K Overhaul

Quote:

Originally Posted by jarek m

I got a new problem to play with, the truck won't start. It actually stalled in the entrance of the gas station, but filing up didn't make a difference.

Things that were happening over couple of weeks before.
Speedometer showing random speeds
Service air massage coming on and off at will
New installed in Sept battery dead three times

Here is what it looks like now (notice there are no icons ligating up but the check engine light, no codes though) :
http://www.youtube.com/user/Jarek13?.../0/8gKrWzqIKxE

Things I've done recently that could be related:
Battery new (Got another one)
Alternator new
Ignition switch (three years old)

What happened to this video? I'm having issues with my instrument cluster, windows, air suspension button, seat heater buttons and a couple of other things and trying to find a common denominator. Ideas?

All times are GMT +1. The time now is 03:47 AM.

Page 6 of 6

Show 40 posts from this thread on one page