Pioneer AVIC D3 installed, but I get no sound
Does anyone know what I need to do to get my Pioneer AVIC D3 to work. Just installed it in my 2003 H2 with a standard GM wiring harness and the display shows everything working fine on the screen, but I get no sound at all. I have the Bose system in the car.
PLease HeLp!! |
Re: Pioneer AVIC D3 installed, but I get no sound
On the 03 models the head unit communicates via class 2 data line to the amp. You will need to replace the amp. Amp is located under the rear of the center console.
|
Re: Pioneer AVIC D3 installed, but I get no sound
or you can use the amp in the d3 and just tap into the factory speakers at the amp location in the center console.
|
Re: Pioneer AVIC D3 installed, but I get no sound
You should be able to run an aftermarket H/U with the factory bose amp and speakers with a interface from PAC, check out www.logjamelectronics.com and I believe what you need is about $100
Here is the part # I believe you need: P.I.E. GM24-0S2 GM Class II Head Unit Converter 2003-2006 H2 I have thier interface for adding an auxillary amp to the factory Bose H/U and speakers. |
Re: Pioneer AVIC D3 installed, but I get no sound
Thank you guys for the great advice ...got the right interface harness and it worked out nicely!!
|
Re: Pioneer AVIC D3 installed, but I get no sound
Quote:
Glad it worked out for you:beerchug: |
All times are GMT +1. The time now is 03:34 AM. |
Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.