[[__--MUD--__]]

that plug that says BANJ is just like a locking cap that is used on a pressurised tank. Thats where you fill up w/ the water solution.

That white cup is the back feed explosion protector- If for some reason combustion feed back into the line, that cup is supposed to prevent from feeding all the way back to the generator.

There has to be a power switch for the tank unless its wired direct to the ignition. There should be a bunch of plates that are directly shorted to extract the hydrogen in the tank. If its not switched and I'm right, if there isn't any water in that tank- Those plates are still heating up.

Doesn't look like the output is connected, there should be a fitting on the plastic area intake tube someplace for that to connect to.