Re: HIHUMMER = HUMMERLESS after Paragon/RauchCreek
ok..then what the fuk is the sh!t on the bottom of my work order??? I'll scan damn thing and post if you think I made this up as well
19308 *had bad ring and pinion gears* - Test drove had clicking noise, sounded like coming from front diff, remved cover inspected foun no sign of problem reinstalled cover check ed fluid levels in both front and rear diff and transfer case, called tan talked to XXXXXXX said to run rubber hoses from front diff and transer case vents test drive to see if could hear noise found noise coming from front diff (Case #8903956) R&R dfont diff found chips in ring and pinion gears, also found preload on pinion at .008" Replaced ring and pinion gears and bearings and side carrier bearing, set preload to .27 spec .015 to .030 rest back lash to .006 spec .003 to .010 perfered .005 to .007 reinstalled in vehicle test drove no noise heard from front diff - RFI casae C16615100376 Excessive rental due to parts being damanged on two orders XXXXXX aware of issue"
Last edited by HIHUMMER : 06-08-2006 at 08:08 PM.
|