grease fittings location

[numberoneolddiver]

threr was a posting some time ago about the number and location of all the grease zerks. I had my h2 in for servicing and they only found 6 fittings this is a 2005 hummer any suggestions,are there more than this?

[Luv2Camp]

here is the link

http://www.elcovaforums.com/forums/s...ad.php?t=30787

[Easy Ed]

I'll try to post all eleven of them in larger pics versus the old one I did. Hope it helps better before.

Ed

Attachment 51403

Attachment 51404

Attachment 51405

Attachment 51406

Attachment 51407

Attachment 51408

Attachment 51409

Attachment 51410

Attachment 51411

Attachment 51412

Attachment 51413

[lvmyhmr]

Great pictures! Just goes to show you you can not trust a grease monkey! My H2 has 90K on it and the upper idler (the one in the mirror in your pic) had never been greased. It was replaced at 50K under warranty. I changed it to a 90 degree zerk and am greasing it myself from now on. They have to take the skid pan off to get at this one and that is how they stripped the threads out of the frame with their air gun! The torque on the UCP is only 22 ftlbs according to the service manual.......that is not an impact gun torque.
Thanks for posting again. Bet I am not the only guy in this position!

[Humvee21]

Excellent thread. I just got to these this weekend, but I wasn't able to figure out how on earth one can get to the one on the upper idler arm. I guess you have to unbolt it to access it? Will change it to a 90 deg zerk then.

[Easy Ed]

These were to be changed out to 90 degree ones by the dealership on the early models when they came in for lube and oil change. I just went ahead and did it myself by un-bolting it and putting a 45 degree in (seen in the picture) since I was doing all my own work on ours.

Good luck, Ed

Originally Posted by Humvee21

Excellent thread. I just got to these this weekend, but I wasn't able to figure out how on earth one can get to the one on the upper idler arm. I guess you have to unbolt it to access it? Will change it to a 90 deg zerk then.