H 3 LOGOS ON DOORS

[SHYANNE]

Is it possible to take of the H 3 badges on the doors and after I have them line x reuse them again if I get new 3 m 2 sided tape ? or will they be to hard to get the stuck dried glue off the H 3 logo back side ? I dont want to paint them like some of the people have while still on the door.I want to either power coat them or linex them so can they be put back on after takeing them off ?

[Sewie]

I'm sure you could reapply them, but I doubt you could PC or Line-X them. I would think either process would ruin the emblem. You could always use the spray-on bedliner stuff I guess. But why not just mask it off real good, rattle can it, and save yourself all the hassle.

[SHYANNE]

Do they make the color in the spray can called gun barrel grey ?

[NEOCON1]

here ya go


its how i did mine

http://www.elcovaforums.com/forums/s...ad.php?t=16744

[Agriv8r]

nice...and yes you can reuse them with new 3m tape...

[SHYANNE]

Hey neo does that paint come in a gun barrel grey color do you know ?and will it hold up in time or will it have to be retouched up in time i really dont wont to ever have to retouch it up again. like the wheels its not to hard to touch up the wheels. but i dont want to retape every thing twice later to touch up the logos.

[evldave]

I used the 'hammered' textured paint, just masked off the door, scratched up the emblem w/some scotchbright pads and painted about 3 coats. That was last summer and it still looks great (note, I did the same on my grill and have all kinds of little shiny spots where rocks have hit the grill and the chrome shines through )

[NEOCON1]

hey SHY , i think they have it in colors , just not sure whats available . i have had to touch mine up and i have to be careful when washing it . if you remove them and prep them really good they should hold up better , i couldant get the edges scuffed very good on mine and thats why i have a little peeling at the top edge .

[The Green Lantern]

I used "Remove all the Badges" paint on all my emblems!

[SHYANNE]

So I guess it safe to say if I leave them on and paint them in time the edges could peel ? Or if I take them off I can really do a better job ?maybe take them up the linx palce. do you think it might be to thick or to heavy with linex ? also i am going to power coat my wheels soon so being my H 3 is black and black wont show up so I am thinking the graphite in the www.duplicolor.com would look good. any other color on black that will show up and look good besides graphite ?

[The Riddler]

http://elcova.com/eve/forums/a/tpc/f...1/m/8341054381

[SHYANNE]

Thanks very much for the link to that. I like the way that looks. I guess I have to decide on what color will good on black . I guess graphite GUN BARREL GRAY unless you can think of a color that will look as good ????

[The Green Lantern]

Originally Posted by The Riddler

http://elcova.com/eve/forums/a/tpc/f...1/m/8341054381

wrong name!