Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H2 (http://www.elcovaforums.com/forums/forumdisplay.php?f=5)
-   -   NEED HELP ASAP PLEASE! (http://www.elcovaforums.com/forums/showthread.php?t=24422)

DDWH 02-03-2007 06:58 PM
NEED HELP ASAP PLEASE!
 
Changing steering stab shock.

How and the hell do you remove the end with just a nut on it. First removed the bolt and nut from the one end. The removed the nut on the other end and the damn thing will not budge, move, creek...zippo!!!! I really didn't want to have to take it to my mechanic for something that seemed so simple but WTF?

DDWH 02-03-2007 08:19 PM
Re: NEED HELP ASAP PLEASE!
 
btt

Anyone??????????????

lennyrebel 02-03-2007 09:00 PM
Re: NEED HELP ASAP PLEASE!
 
Sounds Like a job for a puller --any good bearing puller should work. Or tie a chain around it tie it to a power pole and reverse truck--kidding sort of. Regards The Rebel:confused:

ASTAR 02-04-2007 06:13 AM
Re: NEED HELP ASAP PLEASE!
 
Beat on it from all directions with a BFH. There is nothing else holding it on there. It WILL come out.

tomp 02-04-2007 07:42 AM
Re: NEED HELP ASAP PLEASE!
 
You can get a suspension fork from Autozone by leaving a deposit and costs nothing. Use it, and it will come off amazingly easy compared to any other method you try with tools at home. Take it from me, after I spent 2 hours prying and beating on it, only to get the fork and it pop right off!

DDWH 02-04-2007 05:15 PM
Re: NEED HELP ASAP PLEASE!
 
Quote:
Originally Posted by tomp
You can get a suspension fork from Autozone by leaving a deposit and costs nothing. Use it, and it will come off amazingly easy compared to any other method you try with tools at home. Take it from me, after I spent 2 hours prying and beating on it, only to get the fork and it pop right off!

Thanks for the info tomp, I remembered reading about the fork and I couldn't find the thread to verify.

Screeper 02-04-2007 08:55 PM
Re: NEED HELP ASAP PLEASE!
 
Quote:
Originally Posted by lennyrebel
Sounds Like a job for a puller --any good bearing puller should work. Or tie a chain around it tie it to a power pole and reverse truck--kidding sort of. Regards The Rebel:confused:

I love redneck engineering. They make a nice chopper too.

Al


All times are GMT +1. The time now is 12:32 AM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.