So 'm stubborn and bought a different metra kit, so i need your help if anybody can just eyeball if the kit's going to fit. BTW the manual application does say that it fits the Canyon, Colorado and the H2.

Thanks !

So 'm stubborn and bought a different metra kit, so i need your help if anybody can just eyeball if the kit's going to fit. BTW the manual application does say that it fits the Canyon, Colorado and the H2.

Thanks !

Pic 2

Pic 3

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Game Over:
Pic 3 </div></BLOCKQUOTE>

dude it has to be a 99-3304 dash kit from metra.That kit you have wont fit.Crisco has picture of correct dash kit on his site.

http://www.rausite.com/hummerh3.htm

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by First Hummer:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Game Over:
Pic 3 </div></BLOCKQUOTE>

dude it has to be a 99-3304 dash kit from metra.That kit you have wont fit.Crisco has picture of correct dash kit on his site.
</div></BLOCKQUOTE>Yeah I knew about the 99-3304 but it's no use to me since I need 2 single DIN openings. I was looking real hard at the 99-3304 pics from Crisco's site, now although the mounting tabs for the 99-3304 are so different from what I have, the position where the screws go seems to line up so I think this one will work. If not well there goes $7 Gotta try new things anyway right ?

Don't have any answer for you on the kit but what are you running in your system? You can probably make the one you have fit. I have made many custom modified kits over the years. Just takes some planning and ingenuity.

The clips wont work with that dash kit.If you notice the one Crisco used has rectangular slots for those clips.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by First Hummer:
The clips wont work with that dash kit.If you notice the one Crisco used has rectangular slots for those clips. </div></BLOCKQUOTE>Hopefully u're wrong

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by HummerNewbie:
Don't have any answer for you on the kit but what are you running in your system? You can probably make the one you have fit. I have made many custom modified kits over the years. Just takes some planning and ingenuity. </div></BLOCKQUOTE>I know what u mean, I may have to bust out the dremel & do some fiberglassing for the mounts. Pioneer AVH-P5700DVD w/ DEQ-7600, Nothing exciting but I think better than the factory headunit. As far as some subs, have to wait 'til I get the truck so I can do some custom fitting.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Game Over:
As far as some subs, have to wait 'til I get the truck so I can do some custom fitting. </div></BLOCKQUOTE>

Did you see what bparker had done with some JL 8"s. Damn it looks good. I had done that for someone years ago in a Rodeo and it sounded great so had been thinking about it myself. Glad someone tried it and it works. I am sure that is what I will end up doing.