fitment help (pics)

[Game Over]

So 'm stubborn and bought a different metra kit, so i need your help if anybody can just eyeball if the kit's going to fit. BTW the manual application does say that it fits the Canyon, Colorado and the H2.

Thanks !

[Game Over]

So 'm stubborn and bought a different metra kit, so i need your help if anybody can just eyeball if the kit's going to fit. BTW the manual application does say that it fits the Canyon, Colorado and the H2.

Thanks !

[Game Over]

Pic 2

[Game Over]

Pic 3

[First Hummer]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Game Over:
Pic 3 </div></BLOCKQUOTE>

dude it has to be a 99-3304 dash kit from metra.That kit you have wont fit.Crisco has picture of correct dash kit on his site.

http://www.rausite.com/hummerh3.htm

[Game Over]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by First Hummer:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Game Over:
Pic 3 </div></BLOCKQUOTE>

dude it has to be a 99-3304 dash kit from metra.That kit you have wont fit.Crisco has picture of correct dash kit on his site.
</div></BLOCKQUOTE>Yeah I knew about the 99-3304 but it's no use to me since I need 2 single DIN openings. I was looking real hard at the 99-3304 pics from Crisco's site, now although the mounting tabs for the 99-3304 are so different from what I have, the position where the screws go seems to line up so I think this one will work. If not well there goes $7 Gotta try new things anyway right ?

[HummerNewbie]

Don't have any answer for you on the kit but what are you running in your system? You can probably make the one you have fit. I have made many custom modified kits over the years. Just takes some planning and ingenuity.

[First Hummer]

The clips wont work with that dash kit.If you notice the one Crisco used has rectangular slots for those clips.

[Game Over]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by First Hummer:
The clips wont work with that dash kit.If you notice the one Crisco used has rectangular slots for those clips. </div></BLOCKQUOTE>Hopefully u're wrong

[Game Over]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by HummerNewbie:
Don't have any answer for you on the kit but what are you running in your system? You can probably make the one you have fit. I have made many custom modified kits over the years. Just takes some planning and ingenuity. </div></BLOCKQUOTE>I know what u mean, I may have to bust out the dremel & do some fiberglassing for the mounts. Pioneer AVH-P5700DVD w/ DEQ-7600, Nothing exciting but I think better than the factory headunit. As far as some subs, have to wait 'til I get the truck so I can do some custom fitting.

[HummerNewbie]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Game Over:
As far as some subs, have to wait 'til I get the truck so I can do some custom fitting. </div></BLOCKQUOTE>

Did you see what bparker had done with some JL 8"s. Damn it looks good. I had done that for someone years ago in a Rodeo and it sounded great so had been thinking about it myself. Glad someone tried it and it works. I am sure that is what I will end up doing.