![]() |
If I take a right turn fairly quickly, say making a right turn on to another street, I hear a knock that seems to come from the center of the truck. Any ideas what could cause this or what it could be?
Thanks, Joe |
If I take a right turn fairly quickly, say making a right turn on to another street, I hear a knock that seems to come from the center of the truck. Any ideas what could cause this or what it could be?
Thanks, Joe |
Joe,
Check you center console glove compartment. It's probably your plastic dildo rolling around. ![]() " S & B Member Since 2003 " |
LMAO!!!!
S&B Member since '03 |
Everyone is a comedian
![]() ![]() |
Actually, you have the Dirt Track Edition of the H2. Your truck was made to only turn left.
![]() I'll see if I can find any TSBs on it tonight. Klaus Rare 2003 H2 with UM8 Integrated Navigation Radio ![]() Skull & Bones Member since 2003 |
Thanks Klaus!
|
<HTML>
<HEAD><TITLE>Service Information</TITLE></HEAD> <BODY BGCOLOR="#FFFFFF"> <form name='topNavForm' action='/servlets/CellHandler'> <table width='100%' align='CENTER'> <tr> <td width='25%' slign='LEFT'> <input type='BUTTON' name='back' value='<- Back' onclick='java_script: history.back[);'><input type='BUTTON' name='forward' value='Forward ->' onclick='javascript: history.forward();'> </td> <td width='50%' align='CENTER'> Document ID# 699820 2003 HUMMER H2 </td> <td width='25%' align='RIGHT'> <input type='BUTTON' name='print' value='Print' onclick='java_script: window.print[);'> </td> </tr> </table> <HR> </FORM> <H1>Clunk Noise When Accelerating During Turns</H1> <TABLE WIDTH="100%" BORDER=1> <TR> <TH ALIGN="center" VALIGN="bottom" ROWSPAN=1> Step</P> </TH><TH ALIGN="center" VALIGN="bottom" ROWSPAN=1> Action</P> </TH><TH ALIGN="center" VALIGN="bottom" ROWSPAN=1> Yes</P> </TH><TH ALIGN="center" VALIGN="bottom" ROWSPAN=1> No</P> </TH></TR> <TR> <TD ALIGN="center" VALIGN="middle" ROWSPAN=1><A NAME="S01"> 1</P> </A></TD><TD ALIGN="left" VALIGN="top" ROWSPAN=1> Check for worn or damaged outer CV joints and/or seals.</P> Are the outer CV joints/seals worn?</P> </TD><TD ALIGN="center" VALIGN="bottom" ROWSPAN=1> Go to Step 2 </P> </TD><TD ALIGN="center" VALIGN="bottom" ROWSPAN=1> System OK</P> </TD></TR> <TR> <TD ALIGN="center" VALIGN="middle" ROWSPAN=1><A NAME="S02"> 2</P> </A></TD><TD ALIGN="left" VALIGN="top" ROWSPAN=1> Replace the outer CV joints/seals. Refer to Wheel Drive Shaft Outer Joint and Seal Replacement .</P> Is the repair complete?</P> </TD><TD ALIGN="center" VALIGN="bottom" ROWSPAN=1> System OK</P> </TD><TD ALIGN="center" VALIGN="bottom" ROWSPAN=1> --</P> </TD></TR> </TABLE> <form name='bottomNavForm'> <hr> <table width='100%' align='CENTER'> <tr> <td width='25%' slign='LEFT'> <input type='BUTTON' name='back' value='<- Back' onclick='java_script: history.back[);'><input type='BUTTON' name='forward' value='Forward ->' onclick='javascript: history.forward();'> </td> <td width='50%' align='CENTER'> Document ID# 699820 2003 HUMMER H2 </td> <td width='25%' align='RIGHT'> <input type='BUTTON' name='print' value='Print' onclick='java_script: window.print[);'> </td> </tr> </table> </form> </BODY></HTML> |
Sorry, the above post is all I could find.
Klaus Rare 2003 H2 with UM8 Integrated Navigation Radio ![]() Skull & Bones Member since 2003 |
Every once in a while I heard a clunking that was driving me NUTZ I finally figured out it was my passenger side seat belt hitting the door panel!
![]() |
I have the same thing. It is comming from the right front upper control arm. When turning the bushing is piviting and making a klunking noise. My dealer ended up replacing the idler arm and one of the hub seals. It helped but I think its a temp fix.
R2 Front Locker, Stealth winch, 37" Super Swampers SSR,low center of gravity = Ultimate H2 |
Have you counted your children lately?
You may have one stuck in the glove box wanting to get out? ![]() ![]() ![]() Ric-H2 |
All times are GMT +1. The time now is 01:27 AM. |
Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.