[timgco]

very easy mod to do. All you need is a dremel tool. That is what I used. I cut the bolts down and the plastic legs. I put mine about 1/4" from touching. This way dirt and stuff can still get out and they won;t rub on the wheel itself. I also took one fo th ebolts to Home depot and bought a nut that fit those bolts. I threaded the nut on before I cut it. If there were any burs left,, when you unthread the nut, it should take care of any issue. This way you don;t mess something up on teh wheel.



go for it. it hides the rusty hubs better if you didn;t rattlecan them.