Anyone tired of their Rockstars yet?

[timgco]

very easy mod to do. All you need is a dremel tool. That is what I used. I cut the bolts down and the plastic legs. I put mine about 1/4" from touching. This way dirt and stuff can still get out and they won;t rub on the wheel itself. I also took one fo th ebolts to Home depot and bought a nut that fit those bolts. I threaded the nut on before I cut it. If there were any burs left,, when you unthread the nut, it should take care of any issue. This way you don;t mess something up on teh wheel.



go for it. it hides the rusty hubs better if you didn;t rattlecan them.

[splne1]

Will do Timgco? Yep I sure didn't rattle can my hubs and you can see the rust LOL. Anyhow did you just measure 1/4" and cut? I'm planning on doing the mod as soon as I get back into VA. Also can you get a pic of your wheels and post up? Thanks

[Hellz]

here is mine

i still have to do that mod to bring the caps in closer.

[timgco]

18X9 35 12.50 18 Toyo MT/ Ths truck has been gone for a year and a half. I don;t have any close up shots that I can find. Here's a couple though.

[Big.Z.hummin]

hellz what did you paint the stars with. i love the look man

[Hellz]

used a 800 grit sand paper sponge thingy
completely sanded the whole star then used 2 coats of matte black
think it was a rustoleum.

let it dry over night, then put it back together

[timgco]

I would run some clear over those too. It's easy to touch them up of you need to, but run a flat clear or gloss clear over them, and you shouldn;t have to touch them up.