what do I need to mount my front license plate on my H3?

[sc2178]

Just got my plates today. There are 2 square holes up front but no bracket or any threaded inserts for bolts or anything.

Is there some sort of bracket for it?

[Hummer Guy]

check in your glovebox and see if there are two small plastic plugs -- those pop in those holes, then you can use screws (which may be in there too) to attach the plate..if not -- your dealer probably has a ton of these and would just give a couple to you.

[sc2178]

Originally Posted by Hummer Guy

check in your glovebox and see if there are two small plastic plugs -- those pop in those holes, then you can use screws (which may be in there too) to attach the plate..if not -- your dealer probably has a ton of these and would just give a couple to you.

ah I will check that out. Probably the same as the ones for the back plate.

thanks

[jp's-h3]

You can also get them from any auto parts store!

[sc2178]

no luck in the glovebox.

looks like a stop at AutoZone

[H3.007]

Advance Auto sells these plugs. I remove my dealer vanity plate and plugged the holes with the plugs. They are very large in size. The shaft is about 3/8" OD , 1.5" long, and the cap is about the size of a half dollar. They look like black, streamlined mushrooms.