injector upgrde info

[rogco]

so ive been doing lots of reading and have no idea what to step up to in injector size . Im looking at putting on ls6 heads ported witha mid low cam and kennybell boost a pump and i know the stock injectors are already maxed out so after doing those up grades what injector size should i step up too

[Hellz]

let me know what you find out on this..

i would be somewhat interested in doing this same kind of setup..

[[__--MUD--__]]

Have you looked at what the 6 liter truck heads are capable of?? There is a reason alot of people are buying those...

You are going to need a custom tune on your ecm. check out performancetrucks.net You should easily find a matched component setup for what your trying to do.

I'd budget in your build a new tranny...they dont last long adding additional power to them. You will squeak a little more life out of it if you upgrade the servos- You dont need to pull the tranny to do this.

[rogco]

I've already installed the servos and have a bigger pan and rad for tranny plus I have a shift kit sitting in my shop waiting to go in. So tranny should hold for a bit

[EuroHummer]

Call FAST and tell them your setup. They will recommend the proper injectors. Just had to change the connectors on mine to make them work.

[rogco]

They sell the connectors also or where did you get tose connectors