|
#35
04-27-2006, 08:45 PM
Hummer Expert
Join Date: Mar 2005
Location: Colorado
Posts: 757
Quote:
Originally posted by rkcrawl:
The last thing to consider is that GM used a standard cut gear in the front which is well known to be weaker when used in a front axle application (vs a revese cut gear, think Hi-Pinion diff in the front). This is because the gears are running on the "coast" side of the ring gear teeth.
No, the front axles use a unique ring and pinion, they are not the same as any rear axle gear set. They do not use the coast side as the drive side. You may be thinking of Dana 44 gears from the 70's.
__________________
1999 AMGeneral H1 6.5TD BLACK Wagon e-Lockers Front and Back, Rubberduck4x4 RockTubes, Extended Undercarriage Protection,"Big Duck" 2" body lift/2 1/2" suspension lift, 41" IROK Radials on 17" Cepeks w/Rock Rims, (in process)Centered front diff, 3.08 gears, 12k Brakes and 12k halfshafts
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 10:14 PM.
Threaded Mode