![]() |
BADRAP is correct. I was considering a 16" wheel, but was told that it wouldn't clear the brake caliper and assembly. There's about 1/2" of clearance from the wheel to the brake assembly now, so the reason given to me makes logical sense. Altering the wheel diameter by 1" will result in a 1/2" difference from center.
________________________
\'03 H2 [Sold]
\'03 Chevrolet Silverado Z71, 6\" Rancho Lift, Rear Factory Locker, 35\" ProComp MTs
http://www.smiliegenerator.de/smiley...miley-9839.png
Thread Tools
Search this Thread
Display Modes
Posting Rules