<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Sportsdude:
Bare with me as I'm not too keen on this. The round roof off-road lights kit comes with the harness to install. Wiring that comes down the headliner down the left pillar and connects to the fuse box. The low-profile version does not come with the harness but connects to exisitng wiring? Please clarify on what is needed to install the lights for the H2 that did not have a factory off-road light. Thank you, sorry for the low learning curve on this topic. </div></BLOCKQUOTE>
No problem... I'll try this again.
(at least for the '06) The light bar has a small wiring harness in it. It protrudes from one end of the bar approx. 6"
You are suppose to plug that 6" protrusion harness into a factory harness that is already inside the "A" pillar (left windshield post)
The problem is that harness that is "inside" the windshield post is ONLY available as part of the main wiring harness (eg. you can't buy it separately) and ONLY on the '06's
Soooo, I just cut the factory end off of the 6' harness sticking out of the light bar, soldered some wires onto it ran my own wires into the windshield post.
HTH's,
Mark
|
02-18-2006, 05:58 PM
Posting Rules
Hybrid Mode