Electronic trailer brake question again...

[Happy Hummer]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by PhilD:
Rob, If you follow the positive feed for the front grille guard lamps, you will se that it goes up underneath the Front BEC cover, this cover is held on by plastic clips and then posp off. But it is a real pain to get totally off. I found that by removing the fuse box cover and lifting up the plastic shroud, you can get into it enough to get to the connector okay. You will find two blue wire connectors, that looks like fuse holders, one will be attached to the feed for the front lights, the other will not be connected to anything. Disconnect the lights, and then connect the two blue wires and the circuit should work.<HR></BLOCKQUOTE>

YOU GUYS KICK ASS!!!! I just got done putting the controller in and everything was just like Phil said. Now when I need the trailer brakes I just quick disconnect the lights and plug in the harness in the conrtoller box and there we go!!!

Thanks to all,
ROB

2003 Hummer H2, BLACK, Lux. Pkg but switched all chrome to BLACK, U-Steps, Breathless HID lights and Stage 2B engine kit, Mazzi Maximus 18" chrome wheels and BFG 35X12.50 18 KM Mud Terrain Tires, Alpine DVD Navigation System, Myron & Davis 7" headrest monitors, Audiovox 10 disc DVD Changer, XM Delphi Satellite radio, NSXTC DRL upgrade, Whelen Air Horn, Light Bar, Warn 9.5ti winch
2002 Porsche 911 Twin Turbo
2003 Dodge Viper SRT/10 #150
2003 Honda Odyssey EX
2003 Harley V-Rod Radical Red #68 of 200
http://y42.photos.yahoo.com/bc/robydi2001