|
#1
02-27-2004, 01:07 AM
Join Date: Oct 2003
Location: Seattle, WA
Posts: 21
We just completed the prototype set of our Dakar full slider rocker guards and are looking for a willing participant to test them. Will need to be available at our prototype shop in Standwood, and be flexible for measuring/test fits, and photo shoot. Final version would be comp'd to you. We normally use a rig down at our plant in Eugene, but our designer has limited window to get these done.
Let me know,
Sandy
#2
02-27-2004, 01:07 AM
Join Date: Oct 2003
Location: Seattle, WA
Posts: 21
We just completed the prototype set of our Dakar full slider rocker guards and are looking for a willing participant to test them. Will need to be available at our prototype shop in Standwood, and be flexible for measuring/test fits, and photo shoot. Final version would be comp'd to you. We normally use a rig down at our plant in Eugene, but our designer has limited window to get these done.
Let me know,
Sandy
#4
02-27-2004, 02:03 AM
Join Date: Oct 2003
Location: Seattle, WA
Posts: 21
Is there anyone from the Seattle area?
Sandy
#6
02-27-2004, 09:59 AM
Hummer Veteran
Join Date: Dec 2003
Location: Newnan, GA (transplanted Texan)
Posts: 82
Argo,
Good try...but who couldn't see those two replies comin 
But in the end its good for us because we'll have at least 2 choices on sliders 
__________________
Yellow 03 Adventure w/black Grill, UM8 Touch Screen Navigation Radio, U2K XM Digital Radio, Remote 6-CD Changer, JBA Titanium Headers, Corsa Off-Road Sport, Airaid Filter & MIT, Nology Wires & Plugs, S&P Pro-Flash, Warn 9.5ti w/X-Line, Toyo Open Country M/T 37x13.5.
#7
02-27-2004, 10:09 AM
Join Date: Nov 2003
Posts: 267
Please post lots of pics. Choices are good. I look forward to checking out both.
Front Locker, Stealth winch, 37" Super Swampers SSR,low center of gravity = Ultimate H2
__________________
CONFIDENTIALITY NOTICE: This post and any pictures posted with it are the property of Adam in CO and/or his affiliates. The contents of this post are confidential and may contain information that is privileged and/or exempt from disclosure under all
#8
02-27-2004, 01:29 PM
Hummer Messiah
Join Date: Apr 2003
Location: Virginia Beach
Posts: 37,474
What the heck is a rock slider for?
You actually wheel your H2's?
Sheez... I thought they were Tahoes....
HeeeHeeeHaaaHaaa
Black Lingenfelter Lux
__________________
"My reading of history convinces me that most bad government results from too much government."---Thomas Jefferson
#10
02-27-2004, 06:31 PM
Hummer Guru
Join Date: Nov 2003
Location: Yes..I really moved outta Texas!!
Posts: 2,605
Let me know if you need a trial Vehicle in the San Antonio area. I will definetly put those bad boys to a good test.
Ric-H2
__________________
If you can't be a good example...Then you might as well be a horrible warning!
www.meatspin.com
#11
02-27-2004, 08:03 PM
Join Date: Oct 2003
Location: Seattle, WA
Posts: 21
FYI, the rock sliders will be skinned on the underside in MHNW for the ultimate reduction in friction.
Sandy
#12
02-27-2004, 08:03 PM
Join Date: Oct 2003
Location: Seattle, WA
Posts: 21
Big Need For Rocker Sliders & Underbody Protection
Look here to see some detail of the sliders
#14
02-27-2004, 10:16 PM
Join Date: Oct 2003
Location: Seattle, WA
Posts: 21
Sorry, meant to spell UHMW. This is what the underside will be skinned over with. This material (Ultra-High Molecular Weight) plastic provides maximum abrashion/impact resistance while offering very low coefficient of friction.
Thanks,
Sandy
#15
02-28-2004, 03:39 AM
Join Date: Nov 2003
Posts: 267
Hey, I just decided to move to OR. He hehehe
Front Locker, Stealth winch, 37" Super Swampers SSR,low center of gravity = Ultimate H2
__________________
CONFIDENTIALITY NOTICE: This post and any pictures posted with it are the property of Adam in CO and/or his affiliates. The contents of this post are confidential and may contain information that is privileged and/or exempt from disclosure under all
#16
03-03-2004, 08:08 PM
Join Date: Oct 2003
Location: Seattle, WA
Posts: 21
Hinten:
We are back up north. Let me know when you would like to meet up at the shop for a test fit.
James
#18
03-03-2004, 10:31 PM
Join Date: Oct 2003
Location: Seattle, WA
Posts: 21
Don't know where you got that we had a facility in Puyallup? Our prototype shop is in Stanwood WA. Our main production facility is in Eugene OR. Alec, I thought I would be meeting with Hinten are you here local?
Thanks,
James
#20
03-03-2004, 11:07 PM
Join Date: Oct 2003
Location: Seattle, WA
Posts: 21
One of our partners is Pacific Metal Fabricators in Eugene.
James
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 09:35 AM.
Linear Mode
