Pictures of my wheel shields.

[Rory]

Joe,

Those are my design, I in particular wanted alot of drain holes around the outer edge and I wanted to use a spacer made out of a 5" dia. solid piece of Aluminum that was milled out to make room for the CTIS fitting & hose instead of using spacers made out of thick walled tubing.


I had someone draw them in a CAD program and then they were cut by a waterjet shop. The plates used to make this set of shields are Aluminum since the waterjet shop had some scrap Aluminum sheeting laying around and they gave it to me, charging me only for the actual waterjet cutting.

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Joe:
Very nice. If you do any serious off-roading those shields are worth there weight in gold. Given the high $ cost of any H1 rim the ROI is pretty quick. Highly recommended. Are thise bagman's or your own?

2001 H1 Opentop

Former 03 H2 Adventure Series

Homepage:
http://www.hummerh1.net<HR></BLOCKQUOTE>

Rory
'94 Hummer
www.roryroberts.com
St. Charles, MO