Need help with unidentified stray clip...

[Buckeye Hummer]

I seriously would do it on your own. I guarantee they won't get it in all the way or they will skip a clip. Here's what to do:

1. Take off your shifter handle. There is one screw on the back side (facing the stereo).
2. Lift up your tray (give it a good yank)
3. You will see on the bottom where the clips should go. I am not sure how many there are but if you can't locate them down in your console (they probably fell) go to the dealer and ask for a handful of new ones.
4. Super-glue (or adhesive of your choice) the clips to the bottom of the cup holder.
5. Push hard on the holder to get it back in.

**the problem with this design is that when someone pulls out a water bottle, large containter it puts pressure on the clips, they get loose and fall inside the console. This is why they need to be glued or it will happen again.

Good Luck, if you don't want to do it WATCH the dealer do it and make them use glue.

[DennisAJC]

Originally Posted by Buckeye Hummer

I seriously would do it on your own. I guarantee they won't get it in all the way or they will skip a clip. Here's what to do:

1. Take off your shifter handle. There is one screw on the back side (facing the stereo).
2. Lift up your tray (give it a good yank)
3. You will see on the bottom where the clips should go. I am not sure how many there are but if you can't locate them down in your console (they probably fell) go to the dealer and ask for a handful of new ones.
4. Super-glue (or adhesive of your choice) the clips to the bottom of the cup holder.
5. Push hard on the holder to get it back in.

**the problem with this design is that when someone pulls out a water bottle, large containter it puts pressure on the clips, they get loose and fall inside the console. This is why they need to be glued or it will happen again.

Good Luck, if you don't want to do it WATCH the dealer do it and make them use glue.

You shut your mouth! You drive a Toureg,

I wonder what Jason B is up to now. Good times.