Lift and gears finally done

[Screeper]

Originally posted by 2-H2's:
doc...i'm also waiting for this info...maybe we could get a two-fer???

LC

The gears are Richmond/Motiv. I got the fronts from Phil and the rear from anouther supplier. In hindsight I would have bought both from Phil but he only had the fronts when I ordered. As far as performance I am very pleased. The truck cruises at 80 with no problems(2400 rpm at 70mph). The torque feels the same or better as stock even though I am running 38's. I took the truck down to the Keys for a 200+ mile round trip with a mix of highway and two lane roads. Before the lift and gears I was getting about 11.7. After the trip I was at 11.0. I corrected the speed using a Hypertech although I found out that the unit only goes up to 4:56 so I had to play with the tire size to get it dead on. Thankfully the local police department left one of those radar carts down my street which was great for speedo correction. Any other info I can give just ask. Gears/bearing kits/labor ran me about 1000.00 install of lift was 650.00.

Al