Nav override

[john5519]

Thank you Rodster & Las Vegas, just finished it up and it works great!

Just to let others know, the '05, close enough, but wasn't exactly like the pic shown. There were 4 sets of holes (squares actually) in the front but there were only two rows of wires in the middle, and the "E" was in the exact same place as pictured. They are very small and out on the corners but the A-M lettering is on the plastic shell (actually only 4 letters). There is also another green and white wire above the "E" so make sure you have the correct end up when you cut...

I used the same kind of switch (same location even) as LasVegas, except it does not light up. Radio Shack had a ton of different ones...

Thanks again!