|
#1
11-02-2005, 12:01 PM
Join Date: Nov 2004
Location: On my way to Hummersgonewild!
Posts: 830
I have a 1000 (maybe 1200?) watt Xantrex inverter under the rear passenger seat.
I ran an O-Gauge welding cable (with 150A fuse) through the firewall, under the driver side door sills and into the area under the seats.
It works fine and also gave me a takeoff point for wiring up by backup lights and on-board air system.
O-Guage cable can be found on ebay for about $1.20 foot and is never going to melt on you...
I run a microwave off of my inverter.
Oh yeah... I have the NW dual battery setup too.
I used 26' of welding cable.
If weather is good I'll take pictures.
__________________
\"I\'ll worry about the splinter in my eye when you worry about the plank in your\'s\"
2 Pissed off dealer mechanics, Origami frame, Convex UCP, 2 Bent cross members, Dented driveshaft, Broken sway bar mounts, misaligned transmission, exhaust leak, Pl
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 03:37 AM.
Hybrid Mode