The main number 9500 or 9000 has to do with the pulling capacity 9000 is 9000#. The receiver hitch models are special packages called multimount. You can put any of the ones mentioned on a multi-mount which will slide into the hitch receiver front and rear. The prepackaged one that is available at Hummer dealers includes the wiring for the front hitch mount. The rear is an option. Yes it is only postive and negative wires, but they must attach to the power block near the battery. The rear lead has to be fished through the frame to engine compartment. I got the prepackaged Hummer one (comes with an H2 decal)
with the wiring done for the rear also. $1000 for the package installed for the front an extra $100 for the rear hookup installed. I talked to several "off road experts" and they didn't recommend going higher than the 9000i (Warn also makes an 8000i both packaged as multi mounts) The Hummer package comes with the multi mount reciever post predrilled for a vertical hitch pin placement, (also comes with the hitch pin lock with keys)the basic Warn packages you have to get the verticle pin hole drilled yourself. As far as i vs. Ti or Si, check the Warn site.
|
04-23-2003, 02:22 AM
Posting Rules
Threaded Mode