AVIC-Z1 INSTALLED!!

[marin8703]

Tanks for the quick replies!

i have not installed a car stereo before but i am an electrical engineer, at least will be very soon , so i thought it might not be that bad. If i get in trouble at any time there is an installer close by.

I have the factory monsoon 6 disc changer with xm, amp and subwoofer. I will be keeping everything the same back there and will just be changing the head unit. Is the install any diffrent with this set up than with what you guys were describing above or are you right on?

Do you guys know how the output on the z1 can be connected to the headrest dvds that were in the h3 promotion, so that if a dvd is played on the z1 it can be viewed on the headrest dvds?

Where would be the best place to order the onstar interface and the chime one, and the wiring harness and what ever else may be required for the install?

Oh and some pics would be great if you have some.
Thanks again for your help guys and i apologize for all the questions!

[HummerNewbie]

Originally Posted by marin8703

I have the factory monsoon 6 disc changer with xm, amp and subwoofer. I will be keeping everything the same back there and will just be changing the head unit. Is the install any diffrent with this set up than with what you guys were describing above or are you right on?

You are going for the same setup I have other than the D1 instead of Z1. You should be just fine with the install.

Originally Posted by marin8703

Do you guys know how the output on the z1 can be connected to the headrest dvds that were in the h3 promotion, so that if a dvd is played on the z1 it can be viewed on the headrest dvds?

I have been looking for a way to do that myself. I call the manufacturer who is actually here in town but they said there was no cable of adapter to split the A/V feed from the head rest players. Don't know if you have noticed but all A/V feeds from the headrest go through a 6 pin din cable. I might see if I can order an extra one from them and make my on splitter. I will post if I am successful.

Originally Posted by marin8703

Where would be the best place to order the onstar interface and the chime one, and the wiring harness and what ever else may be required for the install?

You might want to send a PM to kodiakz here on the forum. Just let him know what you are installing and he can get you everything or go down to your local install shop. You will most likely pay more at the local shop though.

[BuzzH3]

Originally Posted by marin8703

I have the factory monsoon 6 disc changer with xm, amp and subwoofer. I will be keeping everything the same back there and will just be changing the head unit. Is the install any diffrent with this set up than with what you guys were describing above or are you right on?

I also have (had) the 6-disc monsoon system, so your install should be the same.

[BuzzH3]

Ok, finally got around the taking pictures.






I ran the XM antenna wire down through this kick panel then up behind the weather stripping...


then up through the air intake cap and up through the roof rail channel


Here is the GPS antenna


and the XM antenna

[marin8703]

hey the nav looks awsome in there, cant wait to have mine done. Thats how im gona route the cable too. Thanks for the pics!