Gas can carrier

[dеiтайожни]

Hmm... The hitch carrier would probably be the quickest thing. I'll see what I can come up with at the store later. thanks

[HummerNewbie]

Originally Posted by dеiтайожни

I'll see what I can come up with at the store later. thanks

You can pick one up pretty cheap at wally world.

[dеiтайожни]

Originally Posted by HummerNewbie

You can pick one up pretty cheap at wally world.

I'll check it out. Otherwise I'll just tie it to the bumper and drag it home, but I'll need a metal container for that.

[HummerNewbie]

Originally Posted by dеiтайожни

Otherwise I'll just tie it to the bumper and drag it home, but I'll need a metal container for that.

The sparks will be real pretty. For a little while at least

[Beastmaster]

I'm looking at adapting this with a 6 lug mounting plate for my wife's H3. Once that's done, I can carry 2 cans of gasoline, a Pioneer toolkit, and a Hi-Lift on it.

Modding this should be easy - have a shop plasma off the 5 bolt pattern mount, and weld a plate with a 6 lug pattern.

http://www.4x4products.com/cargoracks/904.html

[sltbluh3]

The tire gets in the way a little u cant have it folded all the way up then unflod it. So I put it on partially folded the wings just clear the tire so it can then be completely unfolded. It works great with propane tanks as well.

[evldave]

Originally Posted by Beastmaster

I'm looking at adapting this with a 6 lug mounting plate for my wife's H3. Once that's done, I can carry 2 cans of gasoline, a Pioneer toolkit, and a Hi-Lift on it.

Modding this should be easy - have a shop plasma off the 5 bolt pattern mount, and weld a plate with a 6 lug pattern.

http://www.4x4products.com/cargoracks/904.html

That looks like a good idea! You might be able to just re-drill the mounting plate for the 6-lug pattern, rather than pay for a shop to do the work.

A question, what about weight? Do you have your spare on there? With a spare (75#?) + highlift (40#?) + 10 gals of fuel (60#?) + toolkit (10#?), you are starting to put quite a bit of weight on the back. Especially if some is farther from the mounts - it will put more leverage on the mounting points that far back, when you do it you might want to check the mounting points regularly to make sure there isn't deformation of the sheetmetal on the door.

[fourfourto]

Harbor freight tools has this in there catalog.I couldnt find it online.
You would need a roofrack though.


I have a petro pump(harbor freight also) on my 5 gallon can,very handy and does not leak.
I use my work car for transporting gas or I just take it out of the 442 when needed.

Old Car = Old Ho easy to get the hose in

[Beastmaster]

Originally Posted by evldave

That looks like a good idea! You might be able to just re-drill the mounting plate for the 6-lug pattern, rather than pay for a shop to do the work.

A question, what about weight? Do you have your spare on there? With a spare (75#?) + highlift (40#?) + 10 gals of fuel (60#?) + toolkit (10#?), you are starting to put quite a bit of weight on the back. Especially if some is farther from the mounts - it will put more leverage on the mounting points that far back, when you do it you might want to check the mounting points regularly to make sure there isn't deformation of the sheetmetal on the door.

Well, that's going to be the huge question.

A 20 Liter Jerrycan (I use NATO spec ones on all my trucks) are 33lbs full of liquid. A 60" Hi-Lift is 40lbs, and a Pioneer Toolkit is about 20.

So, if you did the loadout that I'm looking at (10gal fuel, Hi-Lift, and Pioneer), it's 126 lbs. The sad part is that I have absolutely no idea if the rack mount itself is rated for that level. I do know that the rack is adjustable to handle anywhere from an 8" to 13.5" tire width, so one could minimize the damaging leverage found in hanging something like that and place it close to the tire.

The other thought process is to modify one of those tire mounted bike carriers and hang stuff off of that.

Or - go the Thule roof rack mount method and get a known good capacity...which is roughly 80lbs per bar. I just hate having a roof rack - it screws with fuel mileage.