Exhaust,intake,throttle body spacer

[Hunner]

Originally Posted by wpage

Where you show your mock up. Is where your stock cold air intake is located in the fender wall. Look from inside your engine compartment. In the air handler there is a 2.5" opening that leads to a air conditioning type filter that connects to a air plenum (chamber) between fender and wheel housing.
If you cut in at that point you may want to 1st pull off your fender to be certain to enter where you should. Otherwise you may miss your mark and have issues...

That is the "hole" idea!
On the truck I just put a pilot hole from the inside in line with the inner fender hole. I do think a hidden intake could work. There of course could be issues of submerging it which I dont plan to do. Im going to have to pull the inner wheel well liner to get in there and see how. A snorkle of some sort would work as well but Im not sure how it would look and the issues of the length of it.
I ordered some flares that came with metal/plastic push fasteners to replace the one time use ones on there now. Im going to see if they will send me some extras.
Thanks for all the input. I really enjoy the chance to discuss the H3 with other owners. This seems to be a popular subject.