![]() |
Re: Oil Changes
Re: Oil Changes
The other thing you should do is put a tiny bit on your tongue. If it tastes soapy, you're probably ok. If it has a metallic/oily taste, then get it drained because you likely have a pressure issue.
<({O})>
Fishing Again.
Re: Oil Changes
With that said, you really shouldn't have a situation where the oil is retained anywhere in the return areas unless there is excess sludge build-up. The lifter valley, upper cylinder head areas, and internal block low pressure pathways all retain some oil as it drains downward towards the pan, but hot and cold readings should still be within safe levels is you're using the right viscosity for the local climate.
Thread Tools
Search this Thread
Display Modes
Posting Rules