You bunch of Snow Hog'n Bastids!!

[NJ H2]

Originally Posted by codeman671

What kind of plow setup is that? Nobody around here has a solution for putting a plow on an H2.

It's a FlexBlade from SnowBear
http://www.truckaccessoriesworld.com...s/snowbear.htm

It's not made for Commercial use but it does work great ... if you have snow! It connects to your front trailer hitch. It has a wireless key fob that raises and lowers the plow. Left and right tilt is manual.
You will also need a 10 inch drop down hitch since the H2 is much higher than most other cars. I bought the Blue Ox

[partsguy]

Keep that stuff turn Pa, into central America for all I care !!!!Hate did I sayHATE snow!!!!!!

Nice plow but I would trade for a spider and a tea set any time.........!!!1

[ROX]

12 foot blade.

[Woogy]

So, I have a version of a hitch mounted snow plow up here in Idaho. After plowing this morning I can no longer remove the hitch pin. Somehow either the pin bent (unlikely) or the bumper/hitch receiver shifted slightly and the holes are no longer lined up.

Anyone have an idea?

[ROX]

Originally Posted by Woogy

So, I have a version of a hitch mounted snow plow up here in Idaho. After plowing this morning I can no longer remove the hitch pin. Somehow either the pin bent (unlikely) or the bumper/hitch receiver shifted slightly and the holes are no longer lined up.

Anyone have an idea?

If the pin is dented or deformed it won't be easy to remove. Have you tried a sledge hammer yet?
Just the receiver is stuck? The blade came off okay?

It's always been my experience that you don't use a good car with a straight frame to plow snow if you ever want it to drive down the road properly again.

[Woogy]

I got the pin out thanks to a rep saw. In essence, I bent the front receiver mount slightly so that the valance holes don't line up properly now.

Fun