Torsion Bar Information

[cestwick]

Originally Posted by HummBebe

Also, I found a Rancho 99227, from a 1 ton suburban 4" lift REAR, is 1" longer, all the same mounting, closed barpin, etc., and I think it's the same as the BDS you mentioned earlier in this thread.

I found some Hellwig adjustable end links, and some helper springs.

The Avalanche front shock Rancho 99268, is the same size as the H3 but with 6"'s of travel, vs 2.34 that Rancho has for the H3, and 4"'s that the stock shock has.

Think this will work?

I don't see why that wouldnt work. The front shock will have more travel then you can use with the front bump stops, but if you raise the bars a little more then you have now to match the rear you will need the extra travel to keep front for topping out the shock and causeing the rough ride.