H3 winch mounts for sale

[H3 Hummer]

I have one of these that I got from Cris. No longer have the H3 but I have this piece. Let me know if you want it.

[Mike E]

Mine is holding up really well. It's still a very good deal at $275.

[HummerNewbie]

Definitely worth $275. These are very strong units and hold up great. I recently used mine to pull out 2 H1s and a new F-350 running 46" tires, mount worked like a charm

[hummer_metal]

This is a well design and fabricated winch deck. I purchased the Warn XD9000i and a hard cover. I put it on alone and it took me about an hour including wiring it in.





I chose to use 3M rubber undercoating and asked Cris to ship it to me raw.

Thanks Cris, you can't go wrong with purchasing one of these.

[CrisB]

Hey Metal, that looks great with the hard cover, where'd you get that?

We've noticed an issue with extremely hard pulls, the grill cage wants to bend out slightly from all the rotational force...working now on fabricating upper attachment points from cage to grill to help, will send out to any buyers with a cage when finished. The metal bumper is actually what's being deformed from the pivot, no bending of the mounts.

Not a huge issue, seeing how many trucks my winch has saved with only a little cage bend in Moab...but is is an issue I want to address. Still seems to be the cheapest way to get a winch on the front.

[Demo]

That's above and beyond Chris, very cool. Very cool.

[hummer_metal]

I ordered the hard cover on line, but you can get them locally at any Warn dealer.

I can't find the diggie camera right now, I added two PIAA off road lights to the deck. Looks badass I think....

I have yet to fab up the steel guards to go around the lights, but when the weather breaks and i get time I will complete them.

Also just to mention I am in the planning phase of a new brush guard as well.

The OEM works okay.... But just doesn't identify with my rig, so to speak...

I have tried a few sketches, and already know I am going to use schedule 40 1" pipe and when I am finished black powder coat.

[CrisB]

Originally Posted by DemoDaddy79

That's above and beyond Chris, very cool. Very cool.

Thanks Demo....I don't want anyone doing damage to the bumper with the mount, seems it only needs a little reinforcement above to avoid the pivot...we'll see what I can come up with. Whatever it is, it'll require drilling to mount to OEM cage, and I think it'll work with most any other cage as well.

I saw the same setup on another manufacturer's cage/winchmount setup...think it was Rough Country? Upper mounting points to help avoid the rotational force, should work with any grill cage.