XM Radio Help

[MarineHawk]

Originally Posted by Woogy

Got it. Pull the little plastic cover off and it worked like a charm.

Are you sure about the cause and effect? You are aware of this, right?: http://www.foxnews.com/story/0,2933,274693,00.html

[johndjmix1]

Be VERY careful with the XM antenna wire......its about as fragile as fiber optic cable.....if you kink it somewhere it will break inside and stop working.

--John

[usetosellhummer]

XM is having sat problems, signal has been decreased! MAY HAVE NOTHINGTO DUE WITH YOUR UNIT!
Problems Solved?
XM's technical issues (NET NEWS 5/21) continued through this morning, but have begun to clear this afternoon. The following notice is currently posted on XM's website:

XM Radio Resumes Normal Levels of Service

XM Satellite Radio has resumed normal levels of service for customers who experienced outages or significantly degraded service starting yesterday.

The problem occurred during the loading of software to a critical component of the satellite broadcast system, which resulted in a temporary loss of signal from one of the company?s satellites.

After you turn on your XM radio, please allow five to ten minutes to reacquire the XM signal.

XM apologizes for any inconvenience this has caused.

this is ongoing so don't belive it will be fixed in one day

[Woogy]

Thanks for the input. I was aware of the outage and my issue is about 3 months old (ever since I added the Gobi).

The existing wire seems to be safe.

Thx

W

[timgco]

Use the method I PM'd you about. That will cure your issue and is a very easy fix.