Am I wrong about this?

[obzidian]

well, the rear ride height is adjusted by a sensor in the rear, by the shock assembly. It's height is only, i believe, is adjusted by that sensor, not the front versus rear angle. So, if you want to, let say raise the rear end, i would think that by raising the set point of that sensor, the rear will raise higher to reach its set point.

[Agriv8r]

the rear sensor is set at the factory to keep the truck "level" under normal driving conditions...if the front is raised high enough, the rear will raise...this would keep the airbags with having more air in them than they would with a normal front end hieght and may cause some unexpected wear on the air system...it would also limit the amout of "rear raise" when the air system button is engaged.....