03 H2: Wires whipping in headliner: what to do?

[wch]

So, I took the trim off the A pillars. Found tape along the windshield edge but it was double-sided, which was interesting. I removed them both before I realized that the temp to put new double-sided 3M tape must be over 68 degrees. So I put them both back on without any tape.

Here's the kicker, the noise went away for the most part. THere is a little vibration but a hell of lot less than what existed before. Not sure I will put the tape back on. Thanks to everyone for the advice. Saved me from taking down the liner!