Good OBD II Scanner???

[OU812]

I no nothing about the H2 codes / lights. However, on my Ford Explorer I had installed a CAI which I believe is causing my check engine light to come on every once and awhile, but it too would after awhile reset itself. I have heard that some can clear themselves if the fault clears (accept I don't know the accuracy of that statement). On others I know for a fact that you can do things to "manually" clear them, e.g., cycle the ignition key like 50 times. On my Ford, I don't know which is causing the light to reset. I do not cycle mine 50 times, but I have never counted. I have bought the ScanGuageII based on a Group Buy, but the light has not reappeared since I bought the thing.

[Sundown94]

For anyone interested, the mechanic said last night that his diagnostic testing revealed that my intake manifold gaskets were leaking and are real close to failing. He said that the extremely cold weather may have caused the intake to shrink more than what the gaskets could handle and the computer detected a leak before the manifold had time to completely warm up and close the gap. Now that we are back in more normal temps, the intake is not so cold and the gasket is just barely making the seal, thus the mechanic said that the intake gasket will probably fail permanently VERY SOON. I wonder if I should return the scanner now. Or maybe locally advertise that I can read codes for $10 per car to recoup the cost of the scanner.

[mdoyle]

A few years ago we had a Chrysler Town & Country that went into limp mode where the transmission stays in 2nd gear so you can get to a dealer. Since we were near the intersection of middle and nowhere, we bought a scanner and reset the code.

It took a few more resets but we finally made it back home so the scanner saved us a very expensive tow and another night in the local roach motel. Since then I've used it several times as have most of my friends, neighbors and co-workers.

When you consider the wide range of vehicles and model years supported by OBD-II, it's worth keeping. Even if you end up at a mechanic, some of them will discount the diagonstic fee if you bring them the codes. I figure at the minimum you'll at least demonstrate you know the score and will be less likely to be taken advantage of.

One word of advice to anyone considering buying one, some code readers only provide an error code that you then must look up in a code book. That's okay as long as you don't lose the book, if possible look for a reader that displays a code description so a separate book isn't required.

[Sundown94]

Thanks for sharing your experience and the advice about owning a scanner. The one I bought tells me everything I need to know directly on the display (no book required) and is updatable from the internet by connecting it to my home computer. Also, I never told my mechanic that I read the codes before bringing my truck in, and when I picked it up, he told me the same codes that the scanner told me...so I think I trust him a little more now.

[mdoyle]

You're welcome! Looks like we own just about the same truck, right down to the color & year (except mine's an adventure pkg instead of lux).

[Sundown94]

Just this past week, my check engine light came back on. Same codes. I love my OBD-II scanner tool (Innova 3110). Fortunately when I bought my pre-owned H2, I negotiated with the dealer to throw in an extended warranty (bumper-to-bumper, through 2010 or 100,000 miles) for free!! So all diagnostics ($100) and intake manifold repairs ($350) were done for $50.