nitto terra grapler thoughts?

[Sewie]

Originally Posted by 3Hummer

And 33" is the biggest you can go without a lift if you want to move up to 35" you need a level kit/ or a lift.

How many fawking times do you have to be corrected on this?

You can fit 35's with no modifications. Many have done it.

[Minarets1]

Originally Posted by Sewie

How many fawking times do you have to be corrected on this?

You can fit 35's with no modifications. Many have done it.

oh! saaaaaaaaaaweeeeeeeeeeeeet!



thanks

[BACKNBLACK]

Originally Posted by Minarets1

oh! saaaaaaaaaaweeeeeeeeeeeeet!



thanks

Quick few torsion bar turns to prevent serious rubbing at full crank and you are all good :-) Make sure you measure from hub to fender well, the truck is never level from factory and even turns on the t-bars are usually not correct. Example. I hhad 4 turns on the driver and 2.5 turns on the passanger to get it level.

[tnd2]

Ive got the terra grapplers on my dodge dually, 235/80r17(31.8x9.3r17). They ride great, very slight hum with the window down and in town speeds. Ive seen 35 TG's and the tread pattern is the same but more open than my small tires.
I was(still am) thinking about them but in a 33 for our H3, I cranked the t-bars but left it 1" higher in the rear. The plan was to go with 35's since the truck is our 3rd ride and for fun, but we noticed that we take it everywhere so we're thinking about staying with a 33 now for the mileage.

[3Hummer]

Originally Posted by Sewie

How many fawking times do you have to be corrected on this?

You can fit 35's with no modifications. Many have done it.

sorry sorry sorry i ment if you do not want to recieve rubbing, its at least in the persons best intrest to crank the t-bars