H2 Side Mirrors

[lonePalm]

I bought the same kind on ebay, just cut the old connectors off my old and resoldered them on the new.....I thought i just told someone on here about this and even posted a picture....You have to solder 1 wire at a time and if you have a vise put both wires in it theold set and the new set and transfer 1 wire at a time, just look where the wires go to, its not that bad.

[Dwaxman1]

Thanks, Got it figured out!

[lonePalm]

Good I'm glad ....I know my instructions were not to straight, Hell I even confused myself trying to write that.

[Dwaxman1]

thanks, what I did was actually got a couple of old broken ones, ripped them apart, took the wiring harness and then used it on the new set, it was great!!!

I am wondering what they old harness was from, what could they have installed these H2 branded mirrors on to???

[lonePalm]

Just helped 8500lbs with the same problem tonight! he's ready to ride now!

[8500lbs]

LonePalm Thank you so much!!!!!!!!!

This guy was a God send!!! I had been working on these for over 6 hours with less than poor results. One Phone call to Lonepalm and with in 10 min. it was working Perfect!!! I dont know how he figured it out but he has to be some sort of genius! He was so willing to help it shocked me. Before I could even ask a question, he was ripping his H2 apart to see what I am seeing. I have never encountered a person so helpful and willing to lend a hand. I will post pics and I will post wire configurations so if anyone else gets into this situation they can have it fixed in 10 min too.

LonePalm thank you once again.

B

[dochummer]

Did you both buy the jacked up mirrors from the same seller on ebay? Definitely post the ID for the guy...

[H2Finally]

Originally Posted by 8500lbs

.. I will post wire configurations..

Do you mean you know what wires does what? Would be very interested to find out which wire does the "fold-in" routine so that I can (finally) have the auto "fold-in" at lock / "fold-out" at unlock like Conrad II's (alegedly ).