H2 leaning to Drivers Side, I thinking Air Bag? Help!!

[IRA51]

No message on DIC,but it drops down on the passanger side after sitting 2 hours sometimes . start the truck and it leveles out . the spring on GM parts direct is for a coil spring .

[TBarrow]

I have a New passenger side Airbag that i have 140.00 invested in that I will sell, List is around 220.. I am in Houston (Cypress 77429) and they are easy to install. I did it in about 15 minutes. I had ordered one got tired of waiting bought another and could not return the other.

Todd

[HumminNBoatin']

I dropped it off at Hummer Of Cincinnati Monday night. They called me in the morning to tell me that They did not find any leaks and the Computer is telling them the drivers side ride height sensor was not reading. So they had to order a new one along with a new harness that GM states it should be sold with the Sensor. Then they need to update the software and recalibrate the ride height. Net Net is that its going to be $500 to fix. I will keep you posted if anything changes.

Eric

[HUMTECH]

It can be done without the jumper harness but gm does recommend it. Each tech to their own though. Some wont sway from the generals recomendations. Ya just need to cut away the shrink wrap on the connector at the old sensor and it unplugs then reroute the oem harness so that it will reach the new sensor as the sensor configuration has changed but the connector is the same.

[HumminNBoatin']

Got it back the total bill 2as $480. Sensor and Harness. Software update to Version 6? Humtech. What exactly does the software update do for me? Benefits of it??

Thanks,
Eric

[HUMTECH]

Calibration updates are mainly for small flaws in an operating system, as they are identified engineers write new programs to correct flaws not unlike windows updates. Newer air suspension systems are non programmable and if someone attempts to program them they will kill the module. Only on the dual compressor systems though.

[HUMTECH]

That didnt even sound clear to me, let me re word that. Dual stage systems are non programmable, single stage are. If an attempt is made to program a dual stage system which i believe came out in late 04(could be wrong) the module will become in-op.