A LITTLE less Bling!

[FGHT ON]

This might help as well to give you a better perspective of just how far they stick out. They stick out past the tube bars.

[Knass34]

I can't tell you how helpful you've been! Thanks for the pic, looks fantastic!! Sorry to ask many questions, but what is your offset on the Rockstars? And would a 325/60/20 be similar to your tire size?

Thank you for your help.

Kal

[FGHT ON]

I want to say 4.5 inches, for some reason that number sticks in my head. SOMEONE CORRECT ME IF I'M WRONG PLEASE!

Yea that's pretty damn close that's going to be 35.4x12.8x20 so just slightly bigger.

[blockrockin]

yeah your right they are 4.5 i have the same ones. love them ! your rig looks awsome !

[Knass34]

This is the rim I've gone with. It's ATX Vice, 20x10 with 0 offset. I don't know what backspacing is so I'm not sure what it would be for this wheel.

[FGHT ON]

See if you can call or somehow find out the backspacing. The offset isn't going to tell you how far the wheel is going to stick out. That may help you decide on the width of the tire you are looking for.

[Knass34]

Originally Posted by FGHT ON

See if you can call or somehow find out the backspacing. The offset isn't going to tell you how far the wheel is going to stick out. That may help you decide on the width of the tire you are looking for.

Ok, from the American Racing website, They list that wheel as:
Size - 20x10
Offset - 0
Backside - 5.500

The tire is approx 13" wide, what's your opinion?

Kal

[HumminNBoatin']

I am running 37x12.5x18 BFG KM's. My offset is Stock. My T-Bars are Mildly Cranked "maybe 1 inch but no more than 2". I have no rubbing EVER. Also keep in mind that when you increase your offset you also will tend to eat up your hubs much faster.

Just my $0.02
Eric

[Knass34]

Originally Posted by HumminNBoatin'

I am running 37x12.5x18 BFG KM's. My offset is Stock. My T-Bars are Mildly Cranked "maybe 1 inch but no more than 2". I have no rubbing EVER. Also keep in mind that when you increase your offset you also will tend to eat up your hubs much faster.

Just my $0.02
Eric

Thanks for your input Eric. The new rims have 0 offset but a backside of 5.5. Would you mind explaining what "hubs" are?

Much appreciated,

Kal

[Knass34]

FGHT ON, your opinion is needed. I put a hold on my order, I just noticed this morning that there is an all black teflon coated version of the rim pictured above.
What's your take on the two choices?

Your opinion is highly valued,

Kal

[Knass34]

Teflon coated version:
Which one do you prefer?

[ROX]

Very nice! Love that color!

[FGHT ON]

It just depends on the look you are going for. Before the H2 I had a tahoe that was completely blacked out with no chrome except for the lip of the wheel becuase I wanted some contrast. The H2 has a little bit of chrome so I didn't care for the xtra accent on the wheels. Also, keep in my where you live and the weather and how ofter you wash the wheels. The chrome lip is going to need a bit more of attention than an all black to keep looking good.

The Teflon is also going to last longer and look better, scratches and wear and stuff . . .